Drum Atlas
Menu

Evans

Chick Evans made the first plastic drumhead in 1956, a year before Remo's. Now part of D'Addario, the brand is known for Level 360 collar design and the oil-filled Hydraulic line.

Country
United States
Founded
1956
Status
active
Parent company
D'Addario
Official site
www.daddario.com

Evans has the stronger claim to being first — Chick Evans was making plastic heads in 1956 — but Remo commercialised the idea faster and took the market. The rivalry has run ever since, and the two catalogues map onto each other closely enough that most players pick by feel rather than by specification.

Two things are distinctly Evans. Level 360 is a collar design that lets the film seat on the bearing edge with less coaxing, which makes heads noticeably easier to tune out. And the Hydraulic line puts a thin layer of oil between two plies for a very short, very fat note — the definitive 1970s recorded tom sound, and still the fastest way to get it.

The numbering is simple once you know it: G1 is one ply, G2 is two, G12 is a heavier single ply.

Timeline


Only one dated event has been sourced for Evans so far — not enough to draw a timeline. A brand timeline is built from dates checked against published sources, so this one fills in as the catalogue's records are verified rather than from memory. See how we source.

Catalogued models

Drumhead · Black ChromeEvans Black ChromeBlack Chrome is an Evans tom batter built from a 7 mil clear ply over a 7.5 mil black ply, giving a mirror-like black surface.Drumhead · CalftoneEvans CalftoneCalftone is Evans’ synthetic calfskin: a 7 mil Mylar base blended with other materials to imitate the look, feel and tone of a real skin head.Drumhead · ECEvans EC Reverse DotThe Evans EC Reverse Dot is a snare batter with a frost-coated 7 mil top ply over a 10 mil bottom ply, pre-EQed by Evans’ Sound Shaping Technology rings and reinforced by a 3 mil dot underneath.Drumhead · EC2Evans EC2 SST ClearThe Evans EC2 SST Clear is two plies of 7-mil film with a Sound Shaping Technology ring mounted on the underside near the edge.Drumhead · EC2Evans EC2 SST CoatedThe Evans EC2 SST Coated is 2 plies of 7-mil film with sound Shaping Technology ring mounted under the film.Drumhead · EMADEvans EMAD ClearThe Evans EMAD is a single ply of 10-mil bass drum batter with an external damping system — a plastic sleeve on the outside of the head that holds an interchangeable foam ring.Drumhead · EMADEvans EMAD HeavyweightThe EMAD Heavyweight is an Evans bass batter built from two plies of 10 mil film and fitted with the EMAD adjustable damping system.Drumhead · EMADEvans EMAD2 ClearThe EMAD2 Clear is a two-ply Evans bass batter — a 7 mil outer ply over a 10 mil inner ply — fitted with the EMAD external damping system and its two interchangeable foam rings.Drumhead · EQ3Evans EQ3 ClearThe EQ3 Clear is an Evans bass batter built from two plies of 6.5 mil film with a fixed internal overtone control ring.Drumhead · EQ4Evans EQ4 ClearThe EQ4 Clear is an Evans bass batter: a single ply of 10 mil film with a fixed internal overtone control ring.Drumhead · G1Evans G1 ClearThe Evans G1 Clear is 1 ply of 10-mil film with no added dampening.Drumhead · G1Evans G1 CoatedThe Evans G1 Coated is a single ply of 10-mil coated film with Level 360 collar technology.Drumhead · G12Evans G12 ClearThe Evans G12 Clear is 1 ply of 12-mil film with no added dampening.Drumhead · G12Evans G12 CoatedThe Evans G12 Coated is 1 ply of 12-mil film with no added dampening.Drumhead · G14Evans G14 ClearThe Evans G14 is a single-ply head heavier than the G12, for players who want single-ply response with maximum durability.Drumhead · G2Evans G2 ClearThe Evans G2 Clear is 2 plies of 7-mil film with no added dampening.Drumhead · G2Evans G2 CoatedThe Evans G2 Coated is a two-ply head, 7 mil per ply, with a coated surface and Evans' Level 360 collar.DrumheadEvans GeneraA single ply of coated 10 mil film with a 2 mil control ring bonded to the underside.Drumhead · GeneraEvans Genera HD DryThe Evans Genera HD Dry is a two-ply snare batter with precision-drilled vents around the perimeter, which bleed off air and with it the ring — a focused attack with the overtones cut back.Drumhead · GMADEvans GMADGMAD is an Evans bass batter built from a single 12 mil ply and fitted with the EMAD adjustable damping system.Drumhead · Genera HDEvans HDThe Evans HD — Heavy Duty — is a two-ply snare batter built from a coated 5 mil outer ply over a 7.5 mil inner ply, with a 2 mil control ring underneath.DrumheadEvans HeavyweightThe Heavyweight uses two plies of 7.5 mil film — half a mil thicker per ply than a G2, which does not sound like much until the head has to survive a year of rimshots.Drumhead · HeavyweightEvans Heavyweight DryThe Evans Heavyweight Dry is a coated snare batter built from two plies of 10 mil film with a 3 mil reverse dot and precision-drilled vents around the perimeter.Drumhead · HybridEvans HybridThe Evans Hybrid is a coated snare batter made from a woven fabric rather than a film: two high-tensile fibres in an ultra-durable weave.Drumhead · HydraulicEvans Hydraulic BlackThe Evans Hydraulic Black is 2 plies — one 6.5-mil and one 7.5-mil — with a layer of oil sealed between them.Drumhead · HydraulicEvans Hydraulic BlueThe Evans Hydraulic Blue is two plies of 7-mil film with a thin layer of oil sealed between them.Drumhead · HydraulicEvans Hydraulic GlassThe Evans Hydraulic Glass is 2 plies of 7-mil film with a layer of oil sealed between the plies.Drumhead · HydraulicEvans Hydraulic RedThe Evans Hydraulic Red is 2 plies of 7-mil film with a layer of oil sealed between the plies.Drumhead · OnyxEvans OnyxOnyx is a two-ply Evans head built from two 7.5 mil plies and finished in a matte black frost coating.Drumhead · Power CenterEvans Power CenterThe Evans Power Center is a coated single ply of 10 mil film carrying a slotted 5 mil centre dot.Drumhead · Power CenterEvans Power Center Reverse DotThe Evans Power Center Reverse Dot is a coated single ply of 10 mil film with a slotted 5 mil dot on the underside.Drumhead · Reso 7Evans Reso 7The Evans Reso 7 is a resonant tom head made from a single ply of coated 7 mil film.Drumhead · Resonant BlackEvans Resonant BlackResonant Black is an Evans resonant head made from a single ply of 7.5 mil black film with no control ring, vents or port.Drumhead · Snare SideEvans Snare Side 300The Evans Snare Side 300 is a single ply of clear 3 mil film for the underside of a snare drum.Drumhead · Snare SideEvans Snare Side 500The Evans Snare Side 500 is a single ply of clear 5 mil film for the underside of a snare drum.Drumhead · STEvans STThe Evans ST — Super Tough — is a coated snare batter built from two plies of 7.5 mil film.Drumhead · STEvans ST DryThe Evans ST Dry is the coated two-ply ST — two plies of 7.5 mil film — with precision-drilled vents around the perimeter.Drumhead · UV1Evans UV1 CoatedThe Evans UV1 is a single ply of 10 mil film finished with a UV-cured coating rather than a sprayed one.Drumhead · UV2Evans UV2 CoatedThe Evans UV2 is two plies of 7 mil film under the same patented UV-cured coating used on the UV1.