
Evans · UV2
Evans UV2 Coated
The Evans UV2 is two plies of 7 mil film under the same patented UV-cured coating used on the UV1. Evans states it was tested with some of the heaviest hitters and gives it a prominent attack, shorter sustain and medium brightness — a G2-weight head built to keep its coated texture under sustained heavy playing.
The same film as a G2, a different surface
Two plies of 7 mil is the standard heavy-duty recipe, and it is exactly what a G2 Coated is built from. The difference is entirely in the finish: where the G2 carries Evans’ conventional coating, the UV2 carries the cured coating introduced on the UV1.
That makes the comparison unusually clean. If you like how a G2 Coated plays but keep wearing the texture off the middle of it, the UV2 is the same head with a surface that lasts.
What two plies do here
Evans gives the UV2 a prominent attack, a shorter sustain and medium brightness — the usual two-ply trade. The second ply damps the head by loading it, so the stick sound is nearer the front and the ring drops away sooner. On a snare that reads as a shorter, drier backbeat; on toms it means the drum stops closer to where you stopped it.
The UV1 is the single-ply version and keeps the sustain. Both use Evans’ Level 360 collar.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 21 |
| Film thickness | 7 + 7 mil1 |
| Coating | Coated1Evans describes the UV2 finish as a patented UV-cured coating layered atop two plies of 7 mil film. |
| Position | Batter1Evans lists the UV2 as a snare batter, a tom batter and a bass batter. |
| Collar | Level 3602 |
| Character | Prominent attack, shorter sustain, medium brightness2 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec