Drum Atlas
Menu

Evans · EMAD

Evans EMAD2 Clear

  • Drumhead
  • pro
  • current

The EMAD2 Clear is a two-ply Evans bass batter — a 7 mil outer ply over a 10 mil inner ply — fitted with the EMAD external damping system and its two interchangeable foam rings. Evans gives it a very defined attack, short sustain and a moderately dark tone.

Updated 2026-09-24Sources

Damping you can change without pulling the head

EMAD stands for externally mounted adjustable damping, and the idea is the useful part. A foam ring sits in a plastic channel around the outside of the hoop line, on top of the head, rather than being bonded underneath it. Swapping the narrow ring for the wide one, or taking it out entirely, takes seconds and does not involve a drum key.

Everything else about bass drum damping — pillows, blankets, bonded rings — commits you before the soundcheck. EMAD does not.

Why EMAD2 is two plies

The original EMAD is a single 10 mil ply. The EMAD2 puts a 7 mil ply on top of a 10 mil one, which is 17 mil of film in front of the beater instead of 10.

Evans describes the result as a very defined attack, a short sustain and a moderately dark tone. The extra ply does two things at once: it stiffens the strike point, so the beater gives a harder and more immediate click, and it shortens the decay before the damping ring has done anything at all. That makes the EMAD2 the version for players who already know they want a controlled kick, and want the foam rings for fine adjustment rather than for the whole job.

Specifications

Specifications
AttributeValue
Heads
Plies21
Film thickness7 + 10 mil1
CoatingClear1
PositionBatter1
DampeningEMAD external ring, two foam widths supplied2
CollarLevel 3601

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    EMAD2 Clear Bass Batter Drumhead

    Evans / D’Addario · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    EMAD2 System Pack

    Evans / D’Addario · accessed 2026-09-24