Drum Atlas
Menu

Evans · Hydraulic

Evans Hydraulic Blue

  • Drumhead
  • pro
  • current

The Evans Hydraulic Blue is two plies of 7-mil film with a thin layer of oil sealed between them. The oil damps the entire head rather than a zone of it, leaving almost no sustain — the deep, dead, punchy tom sound of early-seventies rock records.

Updated 2026-09-11Sources

Oil between the plies

Every other dampening system in this catalogue works on a zone — the centre, or the perimeter. The Hydraulic works everywhere, and it does it with a liquid.

A thin layer of oil is sealed between two 7-mil plies. When the head vibrates, the plies try to move independently and the oil resists that movement across the entire surface, converting the energy into heat.

Fluid damping is extraordinarily effective. There is no part of the head that is free to ring, which is why a Hydraulic has less sustain than anything else you can buy without applying tape.

It also means the damping is inherent rather than adjustable. A ring can be a narrow one or a wide one; a dot can be top or bottom. Oil is oil.

The seventies

The sound this produces is very specific and very dated, in the way that many great sounds are: deep, warm, punchy, and over almost as soon as it starts.

That is the tom sound of early-seventies rock records, and it is not a coincidence — it is roughly the sound engineers of the era were getting by taping wallets and tea towels to the heads, packaged as a product.

If you want that sound, nothing else gets there. If you do not, this is far more damping than most music needs, and an EC2 or a Pinstripe will give you control while leaving the drum alive.

Where it genuinely earns its place

Three cases, and they are real rather than nostalgic.

Recording. A head with no sustain gives an engineer a clean, isolated hit with nothing bleeding into the next microphone. It is much easier to add ambience to a dry drum than to remove ring from a live one.

Loud stages with bad acoustics. In a room that is already a wash of reflections, a resonant tom adds mud. A dead one adds a note.

Drums that will not behave. Some shells have a fundamental problem — a bad edge, an odd size, a pitch that clashes with something. A Hydraulic overrides the shell almost entirely.

Durability and tuning

Two practical notes.

They are exceptionally durable, unsurprisingly — two plies plus a fluid layer absorbing impact energy is a hard thing to dent.

They also tune up easily, which is not obvious. A damped head has less overtone content to fight, so the point where it sounds right is broader and easier to find. For a player who struggles with tuning, this is a genuinely forgiving head.

Colours

Blue is the famous one. Glass (clear), Red and Opaque Black are the same construction with a different tint — the oil layer is what does the work, and the colour is cosmetic.

Specifications

Specifications
AttributeValue
Heads
Plies21
Film thickness7 mil1
DampeningOil layer sealed between the plies1
Dampening coverageWhole head1
PositionBatter1
ColoursBlue, Glass (clear), Red, Opaque Black1
Size range6 to 20 in1
CoatingBlue3Evans lists the Hydraulic tom batter in glass, red, blue and black; this record is the blue film.

Where to find it

Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 2 · Highretailer listing

    Evans Hydraulic Blue Drum Head, 12 inch

    Drum Center of New Hampshire · accessed 2026-09-11

  2. 2Tier 3 · Secondaryeditorial

    Evans Hydraulic Review

    Drumhead Authority · accessed 2026-09-11

  3. 3Tier 1 · Primarymanufacturer spec

    Hydraulic Tom Batter Drumhead

    Evans / D'Addario · accessed 2026-09-21