
Evans · EQ3
Evans EQ3 Clear
The EQ3 Clear is an Evans bass batter built from two plies of 6.5 mil film with a fixed internal overtone control ring. Evans gives it a moderate attack, sustain and brightness with above average durability — a controlled low-end rumble and a focused attack, with the damping built in rather than bolted on.
Fixed damping, and why anyone would want it
The EMAD sells adjustability. The EQ3 sells the opposite: a control ring bonded inside the head, chosen by Evans, that you cannot change and do not have to think about. For a lot of players that is the better deal — a kick drum that sounds the same in every room, with nothing to lose in a case.
Evans describes the effect as a controlled low-end rumble with a focused attack. In practice it means the drum gives you the thump and stops, without a blanket in the shell.
Two thin plies rather than two thick ones
At 6.5 mil per ply the EQ3 is lighter than most two-ply kick heads — an EMAD2 is 7 and 10, an EMAD Heavyweight is 10 and 10. Thinner plies move more freely, so the EQ3 keeps more of the drum’s own note underneath the control ring rather than replacing it with a click.
Evans still rates its durability as above average, which is the point of using two plies at all. The EQ3 Frosted is the same build with a coated surface; the EQ4 drops to a single 10 mil ply with the same kind of internal ring.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec