
Evans · UV1
Evans UV1 Coated
The Evans UV1 is a single ply of 10 mil film finished with a UV-cured coating rather than a sprayed one. Evans states the cured coating gives unmatched durability and consistency of texture, so the head keeps its brush surface far longer than a conventional coated single ply while still sounding open and long.
A coating that is cured, not sprayed
Every coated head is a film with something on top of it. On most heads that something is a sprayed texture, and the stick wears it off the middle of the head long before the film itself gives up. The UV1 replaces the spray with a coating cured under ultraviolet light, which bonds harder to the film.
What a player notices is the brush surface. A conventional coated single ply loses its grain in the strike zone within weeks of steady playing, and brushes start to skate. The UV1 keeps its texture across the whole head for much longer, which is most of the reason it exists.
Under the stick
Underneath the coating it is a plain 10 mil single ply, so it behaves like one: balanced attack, long sustain, a bright tone and a wide tuning range. Evans rates it as more durable than the average single ply, but it is not a two-ply head and does not pretend to be — tuned low it still opens up and rings.
Evans sells the same construction as a snare batter from 12 to 14 inches, a tom batter from 8 to 18, and a bass batter. The UV2 is the two-ply version of the same coating idea.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 11 |
| Film thickness | 10 mil1 |
| Coating | Coated1Evans gives the UV1 coating as a patented UV-cured finish rather than a sprayed one. |
| Position | Batter1Evans lists the UV1 as a snare batter, a tom batter and a bass batter. |
| Collar | Level 3601 |
| Character | Balanced attack, long sustain, bright2 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec