
Evans · Resonant Black
Evans Resonant Black
Resonant Black is an Evans resonant head made from a single ply of 7.5 mil black film with no control ring, vents or port. Evans calls it and the Resonant Glass the thinnest resonant heads in the line, and gives it quick response and enhanced projection — a wide-open tone with maximum sustain.
The thinnest resonant head Evans makes
Evans is unusually direct about this one: along with the Resonant Glass series, it is the thinnest resonant head in the line. At 7.5 mil it sits below the 10 mil G1 Clear that most kits use underneath, and the consequence is more movement for the same amount of air.
Evans describes it as responding quickly and projecting well, and recommends it specifically for live performance. A thinner bottom head starts sooner and throws more of the drum forward; what you give up is a little of the low fundamental a heavier resonant head would hold onto.
The black part
The colour is in the film itself rather than in a coating over it, which is why it stays glossy and does not scuff. On a kit where the batter heads are clear, black resonant heads change the look of the whole drum from the front without touching the batter side at all.
The bass drum version is the same 7.5 mil black film with no control ring, no vents and no mic port — unusual now, and the reason to pick it is the wide-open tone and maximum sustain Evans claims for it. If you want a hole in it, you cut it yourself.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec