Drum Atlas
Menu

Evans · ST

Evans ST Dry

  • Drumhead
  • pro
  • current

The Evans ST Dry is the coated two-ply ST — two plies of 7.5 mil film — with precision-drilled vents around the perimeter. Evans gives it a more defined attack with less than average sustain and a moderately bright tone, so it keeps the ST’s rimshot durability while bleeding off the ring.

Updated 2026-09-24Sources

What the vents do

A dry head is a head with small holes drilled in a ring near the edge. They are not there to let air out of the drum in any useful quantity — they are there to break up the edge modes of the head, the high partials that live near the hoop and read as ring.

The stick strike is in the middle of the head, so the fundamental and the attack survive almost untouched. What goes is the halo around the note.

Against the plain ST

Same two plies of 7.5 mil, same coating, same collar. Evans’ own rating is the difference: where the ST is moderate sustain and tone, the ST Dry is less than average sustain with a moderately bright tone. The vents shorten the note without softening the front of it.

That is a different trade from a control ring, which adds mass and takes brightness along with the ring. If you want a heavy coated snare head that still cracks but does not sing afterwards, this is the dry route to it.

Specifications

Specifications
AttributeValue
Heads
Plies21
Film thickness7.5 + 7.5 mil1
CoatingCoated1
PositionBatter1
DampeningPrecision-drilled perimeter vents1
CollarLevel 3601

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    ST Dry Snare Batter Drumhead

    Evans / D’Addario · accessed 2026-09-24