Drum Atlas
Menu

Parts of a Drumstick

A drumstick is a single piece of turned wood with five named zones — butt, shaft, taper, shoulder and tip — plus the fulcrum, the balance point where it is held. Diameter and length are the two numbers printed on the packet, but taper length is what decides rebound and balance, and it is almost never published. A stick's designation — 5A, 7A, 2B — is not standardised between brands.

Updated 2026-09-11Sources

A drumstick taken apart by zone — butt, shaft, fulcrum, taper, shoulder and tip — and why the taper does more for how a stick plays than the diameter everyone shops by.

Scroll to take it apart. Hover or focus any part to isolate it — or use the arrows on the stage. The diagram is original artwork, free to reference with a link.

Exploded view · wooden drumstick

Exploded view
Side view of a drumstick separated into its named zones — butt, shaft, fulcrum, taper, shoulder and tip. 213456
  1. Buttalso: butt end

    The blunt end, opposite the tip. Usually a plain rounded cut, occasionally a second playing surface.

    Flipping the stick to play with the butt end is a real technique, not an emergency measure — it gives a heavier, blunter attack on a rim or a ride, and it is how a lot of drummers get a bigger backbeat without hitting harder.

    Materials
    Same wood as the shaft; turned, not capped
    Fails by
    Splintering if you play butt-end on a rim regularly

    butt

  2. Shaftalso: body

    The constant-diameter section running from the butt to where the taper begins. This is the part whose measurement gets printed on the stick.

    The published diameter is measured here, and it is the number most people shop by. It tells you how the stick feels in the hand, and very little about how it plays.

    Materials
    Hickory, maple or oak; lacquered, raw or textured
    Fails by
    Denting where it meets the rim on rimshots — the shaft is what breaks, not the tip

    shaft

  3. Fulcrumalso: balance point, pivot

    Not a manufactured part — the point where the stick balances, and where the thumb and index finger grip it. Typically about a third of the way up from the butt.

    This is the single most useful thing to know about a stick and nobody prints it. Hold it at the fulcrum and the stick rebounds for you; hold it too far forward and you are lifting it yourself every stroke. Two sticks of identical diameter can have fulcrums an inch apart because of how the wood is tapered.

    Fails by
    Nothing fails — but a stick that has lost its tip has moved its fulcrum, which is why a chipped stick feels wrong

    fulcrum

  4. Taper

    The section where the stick narrows from full shaft diameter toward the neck. Described as short, medium or long, and rarely given an actual measurement.

    The taper does more than any other feature and is the least documented. A long taper puts less wood out front — faster, more rebound, more flex, less power. A short taper keeps the mass forward — more power, more durability, a front-heavy feel, and less help from the stick on fast passages.

    Materials
    Turned from the same blank as the shaft
    Fails by
    This is where a stick snaps, almost always, because it is the thinnest loaded section

    taper

  5. Shoulderalso: neck

    The narrow stretch between the end of the taper and the base of the tip.

    The shoulder is the part that actually strikes a cymbal edge for a crash, and the part that hits a hi-hat when you play the shank. It takes more abuse than the tip does.

    Materials
    Turned wood; on nylon-tipped sticks, the point where the sleeve is fitted
    Fails by
    Chewing up against hi-hat edges; on nylon tips, this is where the tip separates

    shoulder

  6. Tipalso: bead, head

    The bead at the playing end. Common shapes are teardrop, acorn, barrel, oval and round, in wood or nylon.

    The tip decides the contact patch, and the contact patch decides how bright and how focused the cymbal sound is. A small round tip is pointed and articulate on a ride; a big acorn or barrel spreads the contact and gives a broader, warmer wash. Nylon is brighter and more consistent than wood, and lasts far longer — at the cost of a slightly glassier sound most jazz players dislike.

    Materials
    Turned wood, or moulded nylon on a fitted shoulder
    Fails by
    Wood tips chip and go dull; nylon tips fly off, usually at the worst moment

    tip

The number on the stick means less than you think

There is no standards body for drumstick sizes. “5A” is a designation inherited from mid-century drum corps numbering, and every manufacturer applies it to whatever they think a 5A should be.

Four sticks, all sold as 5A:

Stick Diameter Length
Promark Classic Forward 5A .551 in 16 in
Zildjian 5A .560 in 16 in
Vic Firth American Classic 5A .565 in 16 in
Vater Power 5A .580 in 16½ in

That is a spread of nearly three hundredths of an inch in diameter and half an inch in length, under one name. It is not a scandal — it is just a naming convention that was never a specification. But it does mean “I play 5A” tells another drummer roughly what you like and nothing precise, and that switching brands at the same number will not give you the same stick.

What to actually compare

In rough order of how much it will change your playing:

  1. Taper length. Almost never published. Longer taper means more rebound and less power.
  2. Length. Reach and leverage. Half an inch is very noticeable.
  3. Tip shape. Decides the cymbal sound more than the wood does.
  4. Diameter. What everybody shops by, and mostly a matter of hand comfort.
  5. Wood. Maple light, hickory standard, oak heavy and hard on cymbals.

The honest advice is that sticks are the cheapest experiment in drumming. Buy three pairs of different things rather than reading about them.

Drums this diagram describes