
Evans · EMAD
Evans EMAD Clear
The Evans EMAD is a single ply of 10-mil bass drum batter with an external damping system — a plastic sleeve on the outside of the head that holds an interchangeable foam ring. Two ring widths ship with it, and swapping them takes seconds without removing the head from the drum.
Damping you can change without taking the head off
Bass drum damping has historically meant putting something inside the drum — a pillow, a blanket, a folded towel — and the problem with all of those is that adjusting them means taking the front head off, reaching in, guessing, and putting it back.
The EMAD moves the damping outside. A clear plastic sleeve is fitted around the outer edge of the head, and a foam ring drops into it. Changing the ring, or removing it entirely, takes a few seconds with the drum fully assembled.
For a player who works in different rooms, that is the whole product. You can damp for a dry studio and undamp for a big stage on the same head, at soundcheck, in about ten seconds.
Two rings, two sounds
The head ships with both, and they are meaningfully different rather than fine adjustments.
The narrow ring — ½ inch wide — takes off the worst of the ring while leaving the drum resonant. You get punch and focus with the low end still breathing. This is the one most players end up using.
The wide ring — 1½ inch — damps considerably more, maximising attack and low end at the expense of sustain. It gives the tight, modern, close-mic’d kick sound.
Neither is also an option, and a single ply of 10-mil undamped is a genuinely open, boomy bass drum. Worth trying before assuming you need damping at all.
Why external damping preserves dynamics
The claim Evans makes that is worth taking seriously: external damping works better at low volume than internal damping does.
A pillow resting against the inside of the head is in contact whether you play hard or softly, so it damps a quiet stroke as heavily as a loud one — and quiet bass drum notes disappear entirely. That is why heavily pillowed bass drums have such poor dynamic range.
A ring at the perimeter damps the edge zone, where the film’s movement scales with how hard you hit. Quiet strokes still speak. You keep the range.
Against the Aquarian Super Kick II
The two obvious modern bass drum batters take opposite routes to the same goal.
EMAD is a single ply with external, removable, adjustable damping. Maximum flexibility, more attack from the thinner film, and a small amount of hardware on the outside of your head.
Super Kick II is two plies with a felt ring attached underneath that floats with the head. Nothing to adjust, nothing on the outside, warmer and fatter from the extra ply.
Choose EMAD if you play different rooms and want control. Choose Super Kick if you want one good sound and never want to think about it again.
Practical notes
The sleeve is on the outside, so it is visible — on a drum with a plain front head this is purely functional-looking rather than elegant.
Keep the second ring somewhere you will find it. The most common complaint about this system is that the unused ring is in a drawer at home when you want it.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 11 |
| Film thickness | 10 mil1 |
| Dampening | External foam ring in a plastic sleeve1 |
| Damping rings supplied | Two — ½ in and 1½ in wide1 |
| Ring thickness | ½ in1 |
| Adjustable in place | Yes — without removing the head1 |
| Position | Bass drum batter1 |
| Name | EMAD — Externally Mounted Adjustable Damping*The expansion is widely used but we have not confirmed it against an Evans source. |
| Coating | Clear3 |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 2 · Highretailer listing
- 2Tier 2 · Higheditorial
- 3Tier 1 · Primarymanufacturer spec