Drum Atlas
Menu

Evans · G1

Evans G1 Coated

  • Drumhead
  • pro
  • current

The Evans G1 Coated is a single ply of 10-mil coated film with Level 360 collar technology. It is Evans' direct answer to the Remo Coated Ambassador — the same construction on paper, with a differently shaped collar intended to seat evenly on the bearing edge.

Updated 2026-09-11Sources

Level 360

The one genuine difference between a G1 and a Coated Ambassador is not the film. Both are a single ply of 10-mil coated Mylar. It is the collar — the curved section between the flat playing surface and the aluminium hoop.

The collar is what sits over the bearing edge, and how well it seats determines whether a head tunes evenly. A collar that is too shallow leaves the flat playing area starting inside the shell’s diameter; one that seats unevenly produces wrinkles and lugs that fight each other.

Evans’ Level 360 collar is made deeper and more vertical, so the flat surface extends all the way out to the shell edge and makes even contact right around the circumference.

The stated benefits are easier tuning, a wider usable pitch range, and a head that seats properly on shells whose edges are not perfect. In practice the tuning claim is the one you notice: a G1 tends to come into tune with less chasing.

Aquarian addresses the same problem differently with its Sound Curve collar. It is a real engineering concern that all three companies have taken a run at, and it has nothing to do with the film.

G1, G2, G12, G14

Evans numbers its Genera heads in a way that is almost self-explanatory once you know the rule. The number refers to plies and weight rather than to quality:

  • G1 — one ply, 10 mil. Open, bright, sensitive.
  • G2 — two plies of 7 mil. Warmer, shorter, more durable.
  • G12 — one ply, 12 mil. A heavier single ply, for durability without going two-ply.
  • G14 — one ply, 14 mil. Heavier still.

So a G12 is not “between G1 and G2” in the way the number suggests — it is a thicker single ply, which sounds quite different from two thinner plies. Two 7-mil plies self-damp against each other; one 14-mil ply is simply stiff.

Against a Coated Ambassador

Same film thickness, same ply count, same coating. Players who have used both consistently report small differences, and the honest summary is that the collar and the coating formulation account for them rather than anything dramatic.

If a drum is difficult to tune evenly, the Level 360 collar is a reasonable thing to try. If your drums tune fine, the choice between these two comes down to feel and to what your shop stocks.

This is not a hedge. It is the accurate answer, and the industry has spent decades insisting otherwise.

What it sounds like

Open, bright, sensitive, with long sustain and a wide tuning range. The coating warms the attack slightly and makes brushes possible.

It is the general-purpose single ply, and it wants to be tuned rather than dampened — if it rings too much for you, that is the head doing its job and a two-ply is the answer.

Specifications

Specifications
AttributeValue
Heads
Plies11
Film thickness10 mil1
CoatingCoated1
DampeningNone1
CollarLevel 360 — vertically enhanced for even shell contact1
PositionBatter1
Intended useSnare, toms and timbale1

Where to find it

Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    G1 Coated Drumhead

    Evans / D'Addario · accessed 2026-09-11