
Evans · Onyx
Evans Onyx
Onyx is a two-ply Evans head built from two 7.5 mil plies and finished in a matte black frost coating. Evans gives it a more defined attack, a relatively short sustain and a darker tone. Half a mil thicker per ply than a G2, it sits between that head and the Heavyweight in weight.
Black film with a coating on it
Onyx is easy to mistake for a plain black head, and it is not one. Evans builds it from two 7.5 mil plies and then frost-coats the surface, so it is a coated head that happens to be matte black rather than matte white. Brushes work on it; a bare black film would not give them anything to catch.
The visual is doing real work for a lot of the players who buy it — an all-black kit reads very differently under lights — but the sound is not an afterthought.
Where it sits in the Evans two-ply range
Half a mil per ply does not sound like a distinction worth drawing until you line the heads up. A G2 is 7 and 7. Onyx is 7.5 and 7.5. A Heavyweight is 10 and 10. Onyx sits one step above the G2: a little more mass, a little more front on the note, a little less ring behind it.
Evans describes the result as increased low-end response with a powerful attack and a darker tone. On toms that reads as a fatter note that stops sooner; on a snare it is a thicker backbeat with the overtones pulled back without any ring or gel on top.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 21 |
| Film thickness | 7.5 + 7.5 mil1 |
| Coating | Coated1Evans gives the Onyx surface as a frost coating over black film — coated, in matte black rather than white. |
| Position | Batter2Evans lists Onyx as a snare batter, a tom batter and, with EMAD, a bass batter. |
| Collar | Level 3601 |
| Character | Defined attack, relatively short sustain, darker tone1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec