Tama · Starphonic
Tama Starphonic Brass
The Tama Starphonic Brass (PBR146) is a 14 × 6-inch snare drum on a 1.2mm rolled brass shell, fitted with grooved hoops and a patented Linear-Drive strainer whose tension adjustment runs on a ratchet. The Freedom lugs let you change a head without removing the tension rods.
The strainer is the reason to look at this drum
Most snare throw-offs have one job — on and off — and a tension knob that is a friction fit. Turn the knob, find a setting you like, and then discover a month later that it has crept.
Tama’s Linear-Drive strainer puts the tension adjustment on a ratchet, with fine gears rather than friction. Two things follow. It holds at extreme settings, including very high wire tension where a friction knob will slip. And it is repeatable — you can count clicks back to a setting you know.
For orchestral players, where a snare drum is retuned between pieces and the settings matter, this is not a convenience feature. It is the product.
Freedom lugs and grooved hoops
The hoop is grooved rather than flanged, and the lugs are cut so the tension rods back out of the groove after a few turns instead of having to come all the way out of the lug.
The practical effect: a head change on this drum takes a fraction of the time, and you never lose a tension rod under a riser in the dark. It is the kind of engineering that sounds trivial in a catalogue and turns out to matter every single time you use it.
The grooved hoop also sits differently against the head than a triple-flanged hoop does, holding the collar more evenly.
What it sounds like
A 6-inch depth is an unusual choice, sitting between the standard 5.5 and the deeper 6.5, and it splits the difference honestly — more body than a 5.5, quicker than a 6.5.
The brass is bright and projecting, as brass is, and the drum has enormous dynamic range: it answers at a whisper and it will cut through an orchestra at full tilt. The 20-strand hi-carbon wires are sensitive, so the quiet end is genuinely usable rather than nominal.
It is a cleaner, more clinical drum than a Black Beauty. Which you want depends on whether you value character or control.
Where it fits
Built for concert and orchestral work and unusually good at it. Equally at home on a kit for anyone who wants a metal snare with real range and hardware that stays where it is put.
The head-change design also makes it a sensible choice for anyone who changes heads often — which, on a snare, should be more people than it is.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Rolled brass, nickel-plated1 |
| Shell thickness | 1.2 mm2 |
| Bearing edge | |
| Bearing edge | 45°2 |
| Hardware | |
| Lugs | 10 double-ended Freedom lugs1 |
| Hoops | Grooved, Tama design1 |
| Throw-off | Linear-Drive strainer, MLS50A/MLS50B1 |
| Strainer patent | US 80178461 |
| Tension adjustment | Ratcheted, for repeatable high tension1 |
| Snare side | |
| Snare wires | 20-strand Super Sensitive hi-carbon (MS20RL14C)1 |
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 2 · Higheditorial