Yamaha · Recording Custom
Yamaha Recording Custom Aluminum
The Yamaha Recording Custom Aluminum (RAS-1455) is a 14 × 5.5-inch snare drum with a 1.2mm aluminium shell carrying an external centre bead — a first for Yamaha. Developed with Steve Gadd, it ships with both a 20-strand and a 10-strand snare set, the latter based on Gadd's habit of cutting the middle wires out of his own.
Two sets of wires in the box
The most interesting thing about this drum is a detail most spec sheets bury: it ships with two snare sets, a conventional 20-strand and a 10-strand.
The 10-strand comes directly from Steve Gadd’s own practice of cutting the four middle wires out of a 14-strand set. Fewer wires across the centre of the head means less sympathetic buzz — the rattle a snare picks up from toms, from the bass drum, and from anything else happening in the room — and a higher ratio of head to wire in what you hear.
The result is a drier, more delicate snare sound with more of the drum in it. It is a real change, not a subtlety, and having both sets in the box makes the drum two instruments.
The external bead
Aluminium shells are thin and want to flex. The usual answer is a bead rolled into the shell, as on a Supraphonic, which stiffens the cylinder and lifts the pitch.
Yamaha put the bead on the outside here rather than forming it through the shell. The stated aim is the stiffening without the internal disruption to the shell’s inner surface. In practice it gives a focused, controlled voice with less of the loose metallic ring that a Supra has.
Paired with 3mm die-cast hoops — considerably heavier and more rigid than triple-flanged steel — you get a drum that is noticeably more contained than its obvious rival.
Against a Supraphonic
They are both 14-inch aluminium snares and they do not sound alike.
The Supraphonic is brighter, looser and more open, with a metallic ring around the note that is a large part of its character. It is forgiving and it has personality.
The Recording Custom is tighter, drier and more even, with the overtones pulled in. It was designed for microphones, and it behaves like it — a drum that needs less work to sit in a mix and gives the engineer less to fight.
Which is better depends entirely on whether you want the drum to have an opinion.
Where it fits
Studio work first, which is what the line name says. Also an excellent choice for anyone who records themselves, plays in dense arrangements, or has simply had enough of chasing a ring they cannot tune out.
If you want character and air, the Supra is the cheaper and more charming drum.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Aluminium1 |
| Shell thickness | 1.2 mm1 |
| Bead | External centre bead1 |
| Bearing edge | |
| Bearing edge | 45°1 |
| Snare bed | 2.4 mm1 |
| Hardware | |
| Lugs | 10 one-piece1 |
| Hoops | 3.0mm aluminium die-cast1 |
| Throw-off | Q-Type1 |
| Butt plate | DC31 |
| Heads | |
| Batter head | Remo Coated Ambassador1 |
| Resonant head | Remo Ambassador snare-side, 3 mil1 |
| Snare side | |
| Snare wires | 20-strand supplied, plus a 10-strand set1 |
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 2 · Highretailer listing
Yamaha Recording Custom Aluminum Snare Drum 5.5 × 14, Brushed
- 2Tier 2 · Higheditorial