
Pearl · Free Floating
Pearl Free Floating Brass
The Pearl Free Floating Brass (FTBR1450) is a 14 × 5-inch snare drum whose 1mm brass shell carries no hardware at all. Lugs, throw-off and tension rods mount to a separate frame, so the shell is undrilled and unloaded — and can be swapped for another material in about a minute.
A shell with no holes in it
Every conventional snare drum has its hardware bolted through the shell: ten lugs, a throw-off, a butt plate, an air vent. That is somewhere between twenty and thirty holes drilled through the thing that is supposed to be vibrating, each one carrying a lump of metal clamped against it.
Pearl’s Free Floating design takes all of it off. The lugs, tension rods and throw-off mount to a separate frame that surrounds the shell without touching it, and the hoops pull against that frame rather than against the drum. The shell sits inside, undrilled, held only at its edges.
Two consequences follow, and the second is the one people underrate.
One: the shell is genuinely unloaded
Nothing is bolted to it and nothing is clamping it, so it is free to vibrate along its whole length. Head tension does not compress the shell either, because the tension is carried by the frame.
Whether that is audible is a fair question. It is more audible on thin shells than thick ones, and brass at 1mm is thin. The drum is noticeably more open and more sustaining than its dimensions suggest.
Two: the shell comes out
Because nothing is attached to it, you can lift the shell out and drop a different one in. Pearl sells them separately — maple, and various metals across the line’s history.
That makes this the only mainstream snare drum where the shell is a consumable choice rather than a purchase decision. One set of hardware, several drums. For a session player who wants brass for one track and maple for the next without carrying two cases, it is a genuinely different proposition to anything else on the market.
What the brass sounds like
Bright, loud and open, with the long sustain that thin brass gives and the extra resonance the mounting adds. The MasterCast die-cast hoops pull some of that back in, focusing the attack and tightening the rimshot, which keeps the drum from being unruly.
Against the Tama Starphonic it is looser and more alive; against a chrome-over-brass drum it has less weight but more air.
Buying notes
The line has run through several generations since the 1980s and the frames are not interchangeable across all of them — check the generation before buying a spare shell for an older drum. The current generation dates from 2014.
Worth knowing: the frame makes the drum slightly wider than a standard 14-inch snare, which occasionally matters in a tight basket or a fitted case.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Brass1 |
| Shell thickness | 1 mm1 |
| Shell mounting | Undrilled — no hardware fixed to the shell1 |
| Alternative shells | 6-ply maple, and other shells sold separately1 |
| Hardware | |
| Lugs | FT-50, mounted to the frame2 |
| Hoops | MasterCast die-cast2 |
| Tension rods | 10 × SST-5042 stainless steel2 |
| Throw-off | SR-1602 |
| Heads | |
| Batter head | Remo Coated Ambassador2 |
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 2 · Highretailer listing