Drum Atlas
Menu

Tama · Roadpro

Tama Roadpro Boom Cymbal Stand

  • Hardware
  • pro
  • current

The Tama HC83BW is a double-braced boom cymbal stand with a 28.6mm base tube and a Quick-Set tilter that holds position on six friction discs rather than gear teeth. The boom stores inside the upper tube to convert it to a straight stand. It reaches 82⅝ inches and weighs 11 pounds.

Updated 2026-09-11Sources

Six friction discs

Tama’s Quick-Set tilter solves the toothed-versus-toothless problem with a stack.

Rather than one friction surface — which has to be clamped very hard to hold, and which creeps when it is not — the Quick-Set uses six smooth metal disc plates. Each pair of faces contributes friction, so the total holding force is the sum of six interfaces rather than one.

That means it holds at a moderate clamping pressure, and it stops at any angle you like because there are no teeth to index against.

The catalogue now has three solutions to the same complaint:

Stand Mechanism
DW 9700 Toothless friction plus a Techlock drum-key secondary lock
Tama Roadpro Six stacked friction discs
Pearl S-930 Uni-Lock gearless tilter

All three arrived at the same conclusion independently: gear teeth were always a compromise, and the angle a drummer wants is usually between two of them.

The boom that disappears

The HC83BW converts to a straight stand by sliding the boom arm down inside the upper tube rather than by removing it.

Two things follow. You cannot lose the boom arm, which is the usual fate of detachable ones. And the conversion takes seconds, so a stand set up as a boom for a crowded stage becomes a straight stand for a tight one without a trip to the hardware bag.

For a working drummer playing rooms of different sizes this is more useful than it sounds.

Against the DW 9700

These are the two obvious mid-to-upper boom stands and the comparison is close.

Tama Roadpro — 28.6mm base tube, 11 lb, reaches 82⅝ in, 17¾ in boom, Quick-Set tilter, converts to straight without detaching.

DW 9700 — 1¼ in (31.8mm) base tube, 12.3 lb, reaches 88 in, 18 in boom, toothless tilter with a key lock, three telescoping sections and internal tube insulators.

The DW is taller, heavier and has the extra section and the recording-friendly insulators. The Tama is lighter, cheaper, and has the neater straight-conversion.

If you play in studios, the insulators are a real argument. If you carry your own hardware, 1.3 pounds per stand across five stands is also a real argument.

Glide-Tite

The grip joint where the tubes meet, and the reason it gets a name: an under-designed tube joint is where a cymbal stand develops its wobble, particularly with a heavy cymbal at the end of a long boom applying leverage.

A boom arm is a lever, and a 20-inch crash at the end of an 18-inch boom applies a great deal of torque to whatever is holding it. This is why boom stands wobble when straight stands do not, and why the joint specification is worth reading.

Specifications

Specifications
AttributeValue
Hardware
TypeCymbal stand — boom/straight convertible1
Base tube28.6 mm1
Boom arm length450 mm1
TilterQuick-Set — six friction discs, no gear teeth1
Cymbal attachmentQuick-Set Cymbal Mate — one-touch1
Tube jointGlide-Tite grip joint1
LegsDouble braced1
Height range820–2100 mm1
Weight5.0 kg1
Straight conversionBoom stores inside the upper tube1

Where to find it

Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Roadpro Boom Cymbal Stand HC83BW

    Tama · accessed 2026-09-11

  2. 2Tier 2 · Highretailer listing

    Tama HC83BW Roadpro Boom Cymbal Stand

    Memphis Drum Shop · accessed 2026-09-11