Drum Atlas
Menu

Tama · Stage Master

Tama Stage Master Cymbal Stand

  • Hardware
  • entry
  • current

The Tama HC42SN is a single-braced straight cymbal stand with a 25.4mm base tube, a fine-gear tilter and the Quick-Set Cymbal Mate. At 6.6 pounds it is roughly half the weight of a flagship stand, and it holds a cymbal just as well.

Updated 2026-09-11Sources

Single bracing is a choice, not a failure

The catalogue is full of double-braced hardware, and it is easy to read single bracing as the cheap version. Sometimes it is. Often it is simply the right tool.

A single-braced leg has one strut instead of two. It is lighter, it takes up less floor space, and it folds smaller. What it gives up is resistance to being knocked sideways and the ability to carry a very heavy cymbal on a long boom without moving.

For a straight stand carrying a crash or a hi-hat-height cymbal, there is no boom lever applying torque, so most of what double bracing defends against does not arise.

At 6.6 pounds against the DW 9700’s 12.3, a five-stand setup is thirty pounds lighter. That is one fewer trip to the car, every gig, forever.

The cymbal sounds identical. Nothing about a stand changes how a cymbal sounds, provided it holds the cymbal at the angle you set and does not rattle.

Quick-Set Cymbal Mate

The cymbal attachment, and the most quietly useful thing on the stand.

The conventional arrangement is a threaded rod with a felt washer, a cymbal, another felt washer and a wingnut — which means unscrewing a wingnut for every cymbal at the end of every gig, and a wingnut rolling under the riser at least once a year.

The Cymbal Mate attaches and releases with one touch. Over a few hundred load-ins it adds up, and Tama fits it across the range rather than reserving it for expensive hardware.

Where the money actually went

Comparing this to the Roadpro in the same brand shows what you get for roughly double the price:

Stage Master HC42SN Roadpro HC83BW
Base tube 25.4 mm 28.6 mm
Legs Single braced Double braced
Tilter Fine gear Quick-Set friction discs
Max height 1420 mm 2100 mm
Weight 2.9 kg 5.0 kg
Boom No Yes, stows internally

The tilter is the difference you will notice daily — a fine-gear tilter has small teeth, so the available angles are close together, but they are still steps. The height difference is the one that might rule it out: 1420mm is not tall enough to put a ride over a large kit.

Where it fits

A first set of hardware, a second set for a rehearsal room, or a deliberate lightweight rig for anyone carrying their own gear.

It is also the honest answer for a player who has been told they need heavy hardware and does not. If your cymbals are not large, your boom arms are not long, and nobody is knocking into your stands, single bracing is sufficient — and your back will notice the difference more than your audience will.

Specifications

Specifications
AttributeValue
Hardware
TypeCymbal stand — straight1
Base tube25.4 mm1
LegsSingle braced (HC42SN); double braced as HC42WN2
TilterFine gear1
Cymbal attachmentQuick-Set Cymbal Mate — one-touch1
CouplingsDie-cast1
FeetRubber1
Height range690–1420 mm1
Weight2.9 kg1

Where to find it

Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Stage Master Straight Cymbal Stand HC42WN

    Tama · accessed 2026-09-11

  2. 2Tier 2 · Highretailer listing

    Tama HC42SN Stage Master Straight Cymbal Stand — Single Braced Legs

    Drum Center of New Hampshire · accessed 2026-09-11