
DW · 9000 Series
DW 9999 Tom and Cymbal Stand
The DW DWCP9999 holds a rack tom and a cymbal on one stand. It carries a ball-and-socket tom arm plus an integrated auxiliary clamp for a boom arm, on a 1-inch upper and 1¼-inch base tube — replacing two stands with one and taking the tom off the bass drum.
Getting the tom off the bass drum
The traditional way to mount a rack tom is a post through the bass drum shell. It works, it is compact, and it has one real cost: the tom’s weight and the mount’s hardware are bolted to the shell of another drum.
Two consequences. The bass drum has a hole in it and a bracket clamped to it, both of which damp it. And the tom’s position is limited by where the bass drum is — which for a player who wants the tom lower, flatter or further away is a constraint rather than a choice.
A tom stand removes both. The bass drum can be undrilled (as on the Gretsch Broadkaster’s vintage hardware option, or any modern virgin bass drum), and the tom goes exactly where you want it.
One stand, two jobs
The 9999’s argument is floor space.
A conventional setup with one rack tom and one cymbal over it needs a tom stand and a cymbal stand — six legs competing for the same patch of floor, usually with a pedal or a hi-hat stand already there.
This carries both: a ½-inch ball-and-socket tom arm, and an integrated auxiliary clamp that takes a boom arm for the cymbal. Three legs instead of six.
For small stages, that is the whole product. It is also why this and a rack solve the same problem at different scales — see the Gibraltar rack entry for what happens when one combination stand is no longer enough.
Ball and socket
The tom arm uses a ball-and-socket joint rather than the toothed gear-and-wingnut arrangement most tom mounts use.
The difference is the same one the tilter debate keeps producing: a geared joint indexes to fixed positions, and a ball-and-socket goes anywhere. For a tom, where the exact angle relative to your stroke matters a great deal to how it plays, being able to stop between two teeth is worth more than it is on a cymbal.
It also adjusts in every axis at once. A geared mount usually has separate adjustments for tilt and rotation, which means chasing one with the other.
A note on the DogBone
The boom arm attaches via an SM799 DogBone — DW’s name for a short linking bracket with a clamp at each end.
Worth knowing because it is a wear part and a spare part. If you buy this stand used and the boom arm will not hold position, the DogBone is usually what needs replacing rather than the stand.
Plastic tube insulators, again
Same feature as the 9700, and the same reason: a tom is close to its microphone, and a ringing steel tube directly under it will be picked up.
This is the sort of thing DW’s hardware charges for, and it is genuinely inaudible until you are listening back to a close-mic’d tom and cannot work out where the buzz is coming from.
Specifications
| Attribute | Value |
|---|---|
| Hardware | |
| Type | Combination tom and cymbal stand2 |
| Upper tube | 1 in2 |
| Base tube | 1.25 in2 |
| Tom arm | ½ in ball-and-socket, for DW TB12 brackets2 |
| Auxiliary clamp | Integrated, for a cymbal or percussion arm2 |
| Boom arm | ½ in, on an SM799 DogBone2 |
| Tube joints | Oversized, to minimise wobble2 |
| Memory locks | Hinged, at tube joints, cymbal arms and legs2 |
| Tube insulation | Plastic insulators, for close-mic'd recording2 |
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 2 · Highretailer listing
DW DWCP9999 9000 Series Heavy Duty Single Tom and Cymbal Stand