Tama · Clamps & Attachment
Tama Hoop Grip
The Tama Hoop Grip clamps to a bass drum hoop and accepts an L-Rod or Z-Rod to carry a splash cymbal, cowbell or other accessory. The MC9 has a rubber hoop protector and a dual-position rod holder for mounting on either side of the clamp; rod attachments are bought separately.
Mounting to a drum instead of to the floor
Every other way of adding a splash cymbal to a kit needs floor space: a stand, or a clamp on a stand that is already standing somewhere.
A hoop grip uses the bass drum. The drum is already there, it is heavy, it is not going anywhere, and the space above its hoop is empty.
That makes it the answer for the setup where there is genuinely no more floor — a small stage, a pit, a riser shared with a keyboard rig — and for the addition that is not worth a stand: one splash, one cowbell, one tambourine on a jingle mount.
The rubber protector, which is doing two jobs
A bass drum hoop is either wrapped, lacquered or inlaid, and every one of those finishes is the most visible surface on the kit.
Rubber between the clamp and the hoop stops the jaw marking it. That is the obvious job.
The less obvious one is friction. A clamp on a painted metal jaw against a smooth lacquered hoop relies entirely on clamping force to stay put, and a splash cymbal being struck applies a rotating impulse to it every time. Rubber raises the friction coefficient so the clamp holds without being tightened to the point where it dents the hoop.
Dual-position rod holder
The receiver for the L-Rod or Z-Rod mounts on either side of the clamp body.
That sounds trivial until you set it up. The clamp goes where the hoop lets it — between two lugs, clear of the spurs, clear of the tom mount — and where you want the cymbal is a separate question. Being able to flip the rod holder to the other side of the clamp gives you a second answer without moving the clamp.
L-Rod or Z-Rod
Tama sells both, and the shape decides where the accessory ends up relative to the clamp.
An L-Rod goes up and then across: the accessory sits to one side of the clamp at a chosen height.
A Z-Rod adds a second bend, so the accessory can be carried back over the drum or out past the hoop — useful when the clamp’s only possible position is nowhere near where the cymbal should be.
Neither is included with the clamp, which is worth knowing before ordering: the Hoop Grip on its own holds nothing.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec