Tama · Clamps & Attachment
Tama Multi Clamp
Tama's Multi Clamp comes in two forms. The MC61 joins a stand pipe of 15.9 to 28.6 mm to any attachment on a 19.1 mm pipe; the MC62 is a double clamp joining two pipes in that same 15.9 to 28.6 mm range, with the FastClamp quick-setup system on both sides.
Read the two numbers
A multi clamp has two jaws and they do different jobs, which is why the specification has two figures rather than one.
The host side grips whatever you are clamping to — a cymbal stand’s tube, a hi-hat column, a rack bar. Tama’s range here is 15.9 to 28.6 mm, which covers essentially everything from a lightweight stand’s upper section to a heavy base tube.
The guest side takes what you are hanging on. On the MC61 that is a fixed 19.1 mm, which is the diameter Tama’s own accessory arms, cymbal holders and ratchet arms use.
So the MC61 is a clamp for putting Tama attachments on any stand. The MC62 is two host jaws back to back: it joins pipe to pipe, which is what you need when the thing you are adding is itself a stand section rather than an accessory.
Why these are the most-bought hardware item
A drum kit is designed as a set of stands, and then reality happens: a splash needs to go somewhere, a cowbell arrives, an electronic pad joins, a second snare appears on the left.
None of those came with a stand, and the floor has no more room for one. A multi clamp turns any tube you already own into a mounting point, which is why a working drummer’s hardware bag accumulates them the way a toolbox accumulates adapters.
FastClamp
Tama’s name for the quick-setup mechanism on the MC62, fitted to both sides.
The tedium of a clamp is that fitting one means threading a screw down onto a tube, and removing it means winding the screw all the way back out to clear the tube’s diameter. Multiply by four clamps, twice a day.
A quick-setup clamp opens far enough to drop onto a tube without unwinding, and closes onto it in a fraction of the turns. On a part that goes on and off at every setup, that is the difference between using clamps and avoiding them.
What a clamp cannot fix
One caution worth stating: a clamp transfers its load into the tube it is gripping, and a stand that was specified to hold one cymbal is now holding two.
That is not usually a strength problem — the tube will take it — but it is a stability one. Two cymbals on one tripod is a taller, heavier, more off-centre load than the base was designed around. Spread the additions across stands rather than building a tree on one of them.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec