Sonor · Basic Arm
Sonor Basic Arm and Multi Holder System
The Sonor Basic Arm and Multi Holder system is a set of arms, clamps and holders for building a hardware setup from parts rather than buying finished stands. It splits into Basic Arm 19 and Basic Arm 12 by tube diameter, and shares its ratchets with the 600 Series so components interchange.
Parts, not products
A cymbal stand is a base, a tube, a clamp, an arm and a tilter, sold as one object. A holder system is the same components sold separately, so the object you end up with is the one you specified.
That matters in the cases a catalogue cannot anticipate: a cymbal arm off a rack tube at an angle no stand produces, a tom over a floor tom, a cowbell somewhere absurd, a second snare where nothing was designed to hold one.
The Basic Arm program is Sonor’s version of that, organised around the two tube diameters its hardware uses — 19 mm and 12 mm — so the numbering tells you immediately what fits what.
The shared ratchet
The ratchet is the toothed joint that sets an arm’s angle and holds it. It is also, in most makers’ catalogues, the thing that quietly differs between product lines and makes a part from one family useless on another.
Sonor uses identical ratchets across the Basic Arm system, the Multi Holder system and the 600 Series hardware. So an arm bought for a tom holder goes onto a 600 stand; a holder bought for a rack takes a 600 arm.
That single decision is what turns three catalogues into one system.
Fitting hardware to old drums
The most useful sentence on Sonor’s own page is about drums that are decades old: a Basic Arm assembly will build a classic tom holder for Signature, Phonic, Lite, Performer and Force 2000 and 3000 kits.
Vintage and secondhand kits routinely arrive missing their holders, and a drum with no way to mount it is a drum that does not get played. Most makers answer that with a parts department and a long wait.
Answering it from the current catalogue — with components you can buy new, today, that fit hardware from the 1980s — is a rarer thing, and it is worth knowing before writing off a kit with a missing arm.
What you give up
Building from parts costs more than buying a stand, and it takes a working knowledge of what mates with what.
The compensation is that nothing is redundant. A player assembling a setup this way ends up with exactly the arms they need and no spare stands in a cupboard — and every part remains usable when the setup changes, because it was never welded into a single-purpose object.
Specifications
| Attribute | Value |
|---|---|
| Hardware | |
| Type | Arm, holder and clamp system1 |
| Lines | Basic Arm 19 and Basic Arm 12, by tube diameter1 |
| Compatibility | Shares ratchets with the Multi Holder system and 600 Series hardware1 |
| Retrofit | Builds a classic tom holder for older Sonor series — Signature, Phonic, Lite, Performer, Force 2000 and 30001 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec