Sonor · 600 / 6000
Sonor 600 / 6000 Hardware Series
The Sonor 600 and 6000 are the company's top hardware series, built around a three-segment clamp that spreads its grip over three sides of a stand rod rather than pinching it, and base legs that adjust independently of one another so a stand's footprint can be shaped around the rest of the kit.
The three-segment clamp
A clamp on a round tube usually works by pinching: a split collar closes and squeezes the tube between two faces.
That concentrates the load along two lines. Enough of it and the tube dents — which is how a clamped section ends up with a ring of bruises that then stops sliding smoothly, and how chrome lifts at exactly the point a clamp lives.
Sonor’s clamp acts on three sides instead. The same total force arrives spread over three contact zones rather than two, so the pressure at any one point is lower for the same grip. The tube is held harder and marked less.
It is the sort of engineering that shows up years later rather than in a shop.
Independently adjustable legs
A stand’s three legs normally move together — one collar, one splay angle, three legs at the same height and the same reach.
On the 600 Series each base leg adjusts on its own. That sounds like a small freedom and it solves a specific recurring problem: the leg that is in the way. A cymbal stand behind a floor tom, a hi-hat next to a double pedal’s slave, a snare stand on a riser edge — in each case two legs are fine and one is fouling something.
Being able to shorten or reposition that one leg without moving the stand’s position is the difference between a kit that sets up where you want it and one that sets up where the hardware allows.
Shared ratchets
Within the 600 Series, the Basic Arm system and the Multi Holder system, Sonor uses the same ratchet.
A ratchet is the toothed joint that sets an arm’s angle. Standardising it across three product families means an arm from one can go on a holder from another, and a part bought ten years ago still mates with something bought today.
That is the quiet virtue of a hardware system as against a collection of stands: what you own keeps working with what you buy.
Where the series sits
Sonor’s hardware runs in numbered tiers — 1000 at the economy end, then 2000 with double-braced, lightweight LT and junior XS variants, 4000 as the road-ready professional line, and 600 / 6000 at the top.
The company dates its own hardware history to 1900, when it introduced its first bass drum pedal. The 600 is where the accumulated detail ends up.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec