Yamaha · HEXRACK
Yamaha HEXRACK II
The Yamaha HEXRACK II is an aluminium-alloy drum rack built on hexagonal tubing, sold as a two-leg base set (HXR2LII) that extends to three legs with the HXREXII. Its clamps take tubes from 15 to 34 mm, round or hex, and the system is compatible with the original HEXRACK.
Why hexagonal tube
Every other drum rack uses round tube, and round tube has one structural nuisance: a clamp on it can rotate.
Do a clamp up hard enough and friction holds. Do it up in a hurry, or let it work loose over an evening’s vibration, and the arm creeps around the tube — which on a cymbal arm means the cymbal slowly changes angle, and on a tom means the drum tilts away from the stick.
A hexagonal section cannot rotate inside a matching clamp. The flats key against each other, so the clamp’s job reduces to stopping the arm sliding along the tube, which is a much easier thing for a fastener to do. Setup becomes repeatable in a way round tube has to be persuaded into.
Aluminium alloy, and what Yamaha changed
The original HEXRACK made the hexagonal argument. The second generation was rebuilt from a clean slate around a new aluminium alloy, chosen for strength well beyond the first system’s while staying light.
That combination is the whole point of the redesign. Racks have historically been the heavy option — a steel frame in place of several steel tripods, with the frame usually winning on floor space and losing on weight. An aluminium rack turns that around: the space saving stays, and the load-in gets lighter rather than heavier.
Two legs, then three
The HXR2LII base set is two legs. Add the HXREXII and it becomes a three-leg rack.
Buying a rack in stages is unusual and sensible. A four-piece kit needs less structure than a seven-piece, and a player whose kit grows can extend the frame instead of replacing it — which is the promise every modular system makes and not all of them keep.
The clamp that takes anything
The HXACII arm clamp handles tubes from 15 mm to 34 mm, round or hexagonal, on an extended arm.
That range covers essentially all drum hardware: 9.5 mm and 12.7 mm arms sit in their own receivers, and 15 to 34 mm spans thin cymbal stand uppers through heavy rack tube. A rack whose clamps only fit its own tubing is a closed system; one that clamps anything is a frame you can hang a twenty-year-old cymbal stand off.
Backward compatibility
The second-generation system works with the original HEXRACK’s parts.
For an owner of the first system that is the difference between an upgrade and a replacement. It is also a statement about how long Yamaha expects the tubing to last — a rack tube has nothing to wear out, and a company willing to keep the interface fixed is one that expects you to still own it in twenty years.
Specifications
| Attribute | Value |
|---|---|
| Hardware | |
| Type | Drum rack1 |
| Material | Aluminium alloy1 |
| Tubing | Hexagonal and round1 |
| Configuration | HXR2LII two-leg base set; HXREXII adds a third leg1 |
| Arm clamp | HXACII — secures tubes from 15 to 34 mm, including hexagonal1 |
| Compatibility | Yamaha System Hardware; backward compatible with the original HEXRACK1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec