Drum Atlas
Menu

DW · 6000 Series Ultralight

DW 6700UL Ultralight Boom Cymbal Stand

  • Hardware
  • pro
  • current

The DW 6700UL is an aluminium flush-base cymbal stand in DW's Ultralight range, telescoping ½-inch into ⅝-inch into ¾-inch tube with a ½-inch boom arm. It carries a toothless tilter with Techlock and an adjustable cymbal seat, and is sold in boom and straight configurations.

Updated 2026-09-24Sources

Read the three tube diameters

½ inside ⅝ inside ¾. Compare the DW 9700: ¾ inside 1 inside 1¼.

Those numbers are the whole story of this stand. Every section is one size down from the heavy-duty equivalent, and because a tube’s stiffness climbs roughly with the fourth power of its diameter, dropping from a 1¼-inch base to a ¾-inch one is a very large change in how much the stand resists bending — and an equally large change in how much of it there is to carry.

This is the stand for a 16-inch crash on a short boom, at a sensible height, in a room where you are not fighting a guitar amp. It is not the stand for a 24-inch ride hung out over a floor tom, and DW makes the 9000 Series for that.

Techlock on a light stand

A toothless tilter stops at any angle rather than at the pitch of a set of gear teeth, which is worth having on any stand. Its weakness is creep: a friction joint under a cymbal’s repeated impulse will slowly give.

Techlock is the second lock — a drum-key clamp that pins the joint once the angle is found. On a lightweight stand that is more valuable than on a heavy one, because there is less mass in the assembly to absorb the strike and more of it arrives at the joint.

Where Ultralight fits

DW’s own framing is bop kits, vintage sets and gigging drummers, and the phrase to hold onto is “the lightest trap case imaginable”. The flush base is part of that: no splayed legs, so several stands nest together in a bag instead of stacking into a hedgehog.

A four-cymbal kit built on Ultralight stands is a load one person carries in a single trip. That is a real change to what playing a gig involves, and it is bought entirely with tube diameter.

Specifications

Specifications
AttributeValue
Hardware
TypeCymbal stand — boom, flush base1
MaterialAluminium1
Upper tube0.5 in1
Middle tube0.625 in1
Base tube0.75 in1
Boom arm½ in diameter1
TilterToothless, with Techlock1
BaseFlush base1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    DW 6000 Ultralight Cymbal Stand — DWCP6700UL

    Drum Workshop · accessed 2026-09-24