Roland · V-Drums Acoustic Design
Roland VAD507
A five-piece acoustic-shell kit on the TD-27 module: a 14-inch stainless-steel PD-140DS digital snare, 10 and 12 inch rack toms and a 14-inch floor tom in full-depth wood shells, a 20-inch kick, and digital hi-hat and ride. It adds the VH-14D digital hi-hat to what the VAD506 had.
A stainless steel snare
The 14-inch PD-140DS at the front of this kit has a stainless steel shell, which is an unusual thing to find on an electronic snare and a deliberate one. Metal shells are stiff and light; the pad mounts on a conventional snare stand, sits at acoustic rim height, and carries Roland’s digital multi-element sensing under a tensioned mesh head.
The result is a snare that takes cross-sticks, rimshots and ghost notes as separate events, reported by position across the head rather than by loudness alone. On a kit meant for a stage, that is the drum the audience hears most and the one a drummer will notice first.
Full shells on acoustic hardware
Ten and twelve inch rack toms, a fourteen-inch floor tom, and a twenty-inch kick — all in full-depth, full-diameter wood shells with wraps, on double-braced chrome stands carried down from the flagship VAD706. The toms mount the way acoustic toms mount.
That is the whole argument of the Acoustic Design line. Electronics decide what the kit sounds like; hardware and shell dimensions decide what it is like to sit behind. A twenty-inch kick takes a normal pedal at a normal height and sits on spurs. The spread between the floor tom and the hi-hat is the spread a drummer’s arms already know.
Digital hi-hat, digital ride
The VAD507’s addition over the VAD506 it replaced is the VH-14D digital hi-hat, joining the CY-18DR digital ride and the PD-140DS snare on the TD-27’s three digital ports.
A digital hi-hat reports pedal position continuously, so the ground between fully open and fully closed exists. Half-open sixteenths, a foot splash, tightening through a phrase — those all come from the pedal’s travel, and a switch cannot supply them.
Room to grow
Three auxiliary trigger inputs and the second crash jack stay spare, which is enough for an extra tom, a splash and a percussion pad without going near the module’s limit. Stereo main outputs plus two direct outs cover a small desk; for a bigger one, the VAD706 and its TD-50X have more.
Specifications
| Attribute | Value |
|---|---|
| ekit | |
| Module | TD-271 |
| Pad surface | Multi-ply, tension-adjustable mesh heads on the drum pads1Roland states multi-ply tension-adjustable mesh heads for the kit's drum pads. It does not publish the surface of the CY cymbal pads. |
| Kit configuration | TD-27 module, PD-140DS snare, PDA100-MS and PDA120-MS rack toms, PDA140F-MS floor tom, VH-14D hi-hat, CY-14C-T and CY-16R-T crashes, CY-18DR ride, KD-200-MS kick, two DCS-30 combination stands and a DBS-30 boom stand1 |
| Shells | Full-depth, full-diameter wood shells in wraps — 10 in and 12 in rack toms, 14 in floor tom, 20 in kick; the 14 in snare has a stainless steel shell1 |
| Hi-hat | VH-14D, 14 in digital — the addition over the VAD5061 |
| Cymbals | 14 in and 16 in thin-profile crashes with textured finishes, 18 in CY-18DR digital ride1 |
| Trigger inputs | Four spare trigger jacks on this configuration — AUX 1 to AUX 3 and CRASH 21 |
| Outputs | Stereo main outputs plus two direct outputs on the TD-271 |
| Footprint | 1,850 mm wide by 1,400 mm deep by 1,200 mm high; 54 kg assembled1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec