Drum Atlas
Menu

Roland · V-Drums Acoustic Design

Roland VAD706

  • Electronic kit
  • flagship
  • current

The flagship of the Acoustic Design line: a TD-50X module driving a PD-140DS digital snare, full-depth wood-shell toms, the VH-14D digital hi-hat and CY-18DR digital ride, and a 22-inch KD-222 kick. Three-layer mesh on the snare and floor tom, two-layer on the rack toms.

Updated 2026-09-24Sources

The mesh is not the same everywhere

The detail worth pulling out of the VAD706’s specification is that Roland fits different heads to different drums: three layers of mesh on the snare and the floor tom, two on the rack toms.

That is a tuning decision, not a manufacturing convenience. More layers damp the rebound further and quieten the pad. A snare wants the tightest, most controlled response of anything on the kit because it carries the fast work; a floor tom, struck hard and low, benefits from the same damping for a different reason. Rack toms played in fills want a livelier surface.

An electronic kit that uses one head everywhere is easier to make and feels more uniform under the sticks than a real kit does. This one does not.

A TD-50X in acoustic clothes

The module is Roland’s flagship — the deepest editing in the TD range, the widest recording and live I/O, and Prismatic Sound Modeling’s adjustable shell dimensions, tuning and dampening. The VAD706 is what that module looks like when the pads it drives have been built as drums.

Full-depth, full-diameter wood shells, a 22-inch KD-222 kick, double-braced chrome stands, and four finishes — stained maple veneers under transparent gloss coats, or the flat Pearl White. Kits are bought on how they look more often than anyone admits, and this line is built on that.

Digital snare, hi-hat and ride

The PD-140DS, VH-14D and CY-18DR occupy all three of the TD-50X’s digital ports, so the three positional instruments on the kit are all sensing rather than triggering. Head position on the snare, continuous hi-hat travel, and bow, edge and bell separation on an 18-inch ride.

Five trigger jacks stay free after that — TOM 4 and four AUX — which is a fourth tom and three more pads before the module runs out.

Against the VAD716

The 716 is the newer flagship and runs the V71 with its expandable library and the PD-14DSX snare. The VAD706 is the TD-50X generation of the same idea, at the same size and about seven kilos lighter, with a finish range the newer kit does not offer.

Specifications

Specifications
AttributeValue
ekit
ModuleTD-50X1
Pad surfaceMulti-ply mesh — three-layer heads on the snare and floor tom, two-layer on the rack toms1Roland states the layer counts on the VAD706 page. It does not publish the surface of the CY cymbal pads.
Kit configurationTD-50X module, PD-140DS snare, PDA100 and PDA120 rack toms, PDA140F floor tom, VH-14D hi-hat, two CY-16R-T crashes, CY-18DR ride, KD-222 kick, DTS-30S stand set1
ShellsFull-depth, full-diameter wood shells on double-braced chrome stands, in four finishes including stained maple veneers under transparent gloss1
KickKD-222, 22 in1
Trigger inputsFive spare trigger jacks on this configuration — TOM 4 and AUX 1 to AUX 41
Footprint1,950 mm wide by 1,500 mm deep by 1,250 mm high; 62 kg assembled1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Roland VAD706

    Roland · accessed 2026-09-24