Drum Atlas
Menu

Roland · TD-27

Roland TD-27KV2

  • Electronic kit
  • pro
  • current

The TD-27KV2 is the fuller of the two kits built on Roland's TD-27 module: a 14-inch PD-140DS digital snare with a three-layer mesh head, three PDX-100 mesh toms, the VH-14D digital hi-hat and the CY-18DR digital ride. Three of its pads sense digitally; the rest run on analogue triggers.

Updated 2026-09-24Sources

The kit where digital pads become standard

The TD-27 module has three digital trigger ports, and the KV2 is the configuration that uses all three: the PD-140DS snare, the VH-14D hi-hat and the CY-18DR ride. Buying the module in this kit means the sensing pads are already there rather than being a later purchase.

The difference those make is not louder or clearer — it is positional. The snare knows where across the head the stick landed and separates head, rimshot and cross-stick from each other; the hi-hat reports continuous pedal travel instead of a handful of steps; the ride distinguishes bow, edge and bell. Those are the articulations that make a part sound played rather than programmed.

A 14-inch snare on a 14-inch shell

The PD-140DS fits its three-layer mesh head to a standard 14-inch shell. That matters more than the head count suggests: a full-size shell puts the hoop at the right diameter and the playing surface at the right size, so a stroke landing an inch off centre still lands on the head.

Three layers of mesh is Roland’s answer to the trade-off in a tensioned head. A single layer is bouncy and noisy; stacking layers damps the rebound toward what a drumhead actually does and cuts the acoustic noise the pad makes in the room.

Three toms and thin cymbals

Three PDX-100 mesh-head pads cover the toms, and the crashes are 12 and 14 inch thin-profile CY-T pads. The thin profile is a movement decision rather than a sound one: a thin cymbal pad swings when struck and settles the way a cymbal does, so the stick meets something that gives.

Four trigger jacks are left spare — AUX 1 to AUX 3, plus the CRASH 2 input used here for the second crash — which is room for an extra tom, a splash or a percussion pad.

Against the rest of the range

At 33 kg and 1,550 mm wide it is a compact rack kit, not a shell kit; the VAD507 is the same module in acoustic shells. Below it, the TD-17KVX2 uses the same idea with analogue pads throughout. The TD-27KV2 is the point in the V-Drums range where digital sensing stops being an upgrade path and becomes what you get.

Specifications

Specifications
AttributeValue
ekit
ModuleTD-271
Pad surfaceThree-layer mesh snare and mesh-head toms1Roland states a three-layer mesh head on the PD-140DS snare and describes mesh-head pads across the kit. It does not publish the surface of the CY cymbal pads.
Kit configurationTD-27 module, PD-140DS snare, three PDX-100 toms, VH-14D hi-hat, CY-12C-T and CY-14C-T crashes, CY-18DR ride, KD-10 kick, MDS-STD2 stand1
Snare padPD-140DS, 14 in digital, three-layer mesh on a standard 14 in shell, with multi-element sensing for head, rimshot and cross-stick1
Hi-hatVH-14D, 14 in digital1
Cymbals12 in and 14 in thin-profile crashes, 18 in CY-18DR digital ride1
Trigger inputsFour spare trigger jacks on this configuration — AUX 1 to AUX 3 and CRASH 21
Footprint1,550 mm wide by 1,200 mm deep by 1,200 mm high; 33 kg assembled1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Roland TD-27KV2

    Roland · accessed 2026-09-24