Drum Atlas
Menu

Roland · V-Drums Acoustic Design

Roland VAD307

  • Electronic kit
  • intermediate
  • current

Acoustic-style wood shells on the TD-17 module, cut down in depth to save space: a 12-inch snare and 12-inch floor tom, two 10-inch rack toms and an 18-inch kick, with the VH-10 hi-hat and thin-profile crash and ride pads. Its footprint is that of a mid-level rack kit.

Updated 2026-09-24Sources

Shallow shells, acoustic layout

The VAD307 is the Acoustic Design idea worked out for a room that cannot take a full shell kit. The shells are real wood and full in diameter — 12-inch snare, two 10-inch rack toms, a 12-inch floor tom and an 18-inch kick — but cut down in depth, which takes out most of the bulk and most of the weight without touching anything the player’s hands or feet reach.

Depth is what a shell kit costs you in a small room, and it is the dimension that matters least on an electronic kit, where the shell is housing rather than a resonating chamber. Diameter is the dimension you play on. Trimming one and keeping the other is the right way round.

The footprint that results — 1,315 mm across, 37.9 kg — is the same as a mid-level rack kit’s, so this sits where a TD-17KVX2 would sit and looks like a drum kit doing it.

The spread is the point

Roland describes the layout as creating a naturally wide spread, which is a plain way of saying the drums are where drums go. Rack toms on mounts, floor tom on its own stand, snare on a snare stand, kick on the floor taking a normal pedal.

Compact electronic kits pull everything toward the player to save space, and a drummer who learns their distances on one has to relearn them at a rehearsal. This kit does not create that gap.

The module underneath

The TD-17 carries the acoustic and electronic instruments of the mid V-Drums range with editing well past preset-picking, plus Coach mode and Bluetooth for playing along. The hi-hat is the VH-10 on a conventional stand, so pedal travel is continuous rather than switched.

Thin-profile crash and ride pads swing and settle after a strike, and choke at the edge with a grab of the hand. Two trigger jacks stay free for an extra pad.

Against the rest of the line

The VAD103 below it is the same idea on the TD-07 module with fewer pads; the VAD507 above it moves to the TD-27, full-depth shells and digital snare, hi-hat and ride. The 307 is the point where the Acoustic Design look becomes affordable without the layout being compromised to get there.

Specifications

Specifications
AttributeValue
ekit
ModuleTD-171
Pad surfaceMulti-ply, tension-adjustable mesh heads on the drum pads1Roland states multi-ply tension-adjustable mesh heads for the kit's drum pads. It does not publish the surface of the CY cymbal pads.
Kit configurationTD-17 module, PDA120LS-BK snare, two PDA100L-BK rack toms, PDA120L-BK floor tom, VH-10 hi-hat, two CY-12C-T crashes, CY-14R-T ride, KD-180L-BK kick, three DCS-30 combination stands1
ShellsCut-down shallow wood shells — 12 in snare and floor tom, two 10 in rack toms, 18 in kick, on double-braced stands with tom mounts and cymbal boom arms1
Hi-hatVH-10, 12 in, on a conventional hi-hat stand1
CymbalsTwo 12 in thin-profile crashes and a 14 in thin-profile ride, all chokeable at the edge1
Trigger inputsTwo spare trigger jacks on this configuration — AUX and CRASH 21
Footprint1,315 mm wide by 1,200 mm deep by 1,200 mm high; 37.9 kg assembled1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Roland VAD307

    Roland · accessed 2026-09-24