Drum Atlas
Menu

Roland · TD-17

Roland TD-17KVX2

  • Electronic kit
  • intermediate
  • current

The largest of the TD-17 kits: a 12-inch PDX-12 snare on a double-mesh head mounted to a conventional snare stand, three 10-inch PDX-8 mesh toms, a 12-inch VH-10 hi-hat on a real hi-hat stand, and thin-profile crash and ride pads, all on the TD-17 module.

Updated 2026-09-24Sources

The snare goes on a snare stand

The specification that changes the most about how this kit plays is also the least technical one: the PDX-12 snare mounts on a conventional snare stand rather than on an arm bolted to the rack.

A stand puts the snare where the player wants it, at the angle they want, at the height their technique was built around, and it lets them move it without rebuilding the kit. A rack arm puts it where the arm reaches. Anyone who has tried to set a comfortable snare angle on a compact electronic kit knows which of those is worth having.

Twelve inches of double mesh on that stand is also a serious playing surface — large enough that ghost notes near the edge and accents in the centre land on different parts of the same drum, which is what a snare is for.

A hi-hat on a hi-hat stand

The VH-10 is a two-part hi-hat that mounts on a real hi-hat stand and moves through the same travel a pair of cymbals would. Pedal position controls the sound continuously, so half-open work and foot splashes behave, and the foot learns the motion it will need on an acoustic kit.

This is the single most common gap between a practice kit and a playable one. Compact kits often fix the hi-hat pad to a post and read the pedal as a switch, and everything between open and closed disappears.

Three toms and thin cymbals

Three 10-inch PDX-8 mesh pads with head and rim triggering, two 12-inch thin-profile crashes and a 14-inch thin-profile ride. Thin cymbal pads swing and settle after a hit rather than staying rigid, which is a feel decision rather than a sound one — the stick meets something that gives.

Two trigger jacks stay free, so an extra tom or a percussion pad can be added without a module change.

Where it fits

At 24.7 kg it is genuinely a bedroom-and-back-of-a-car kit; the MDS-Compact rack is 1,315 mm wide. Above it, the TD-27KV2 puts digital sensing pads on the snare, hi-hat and ride. The TD-17KVX2 is what the TD-17 module can do with analogue pads when none of them have been shrunk to save money.

Specifications

Specifications
AttributeValue
ekit
ModuleTD-171
Pad surfaceDouble-mesh snare and mesh-head toms1Roland states a double-mesh head on the PDX-12 snare and mesh heads on the three PDX-8 toms. It does not publish the surface of the CY cymbal pads.
Kit configurationTD-17 module, PDX-12 snare, three PDX-8 toms, VH-10 hi-hat, two CY-12C-T crashes, CY-14R-T ride, KD-10 kick, MDS-Compact stand1
Snare padPDX-12, 12 in, double mesh, mounted on a conventional snare stand1
Hi-hatVH-10, 12 in, with natural motion and open/closed detection1
CymbalsTwo 12 in thin-profile crashes and a 14 in thin-profile ride1
Trigger inputsTwo spare trigger jacks on this configuration — AUX and CRASH 21
Footprint1,315 mm wide by 1,100 mm deep by 1,200 mm high; 24.7 kg assembled1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Roland TD-17KVX2

    Roland · accessed 2026-09-24