Roland · V-Drums Acoustic Design
Roland VAD103
The entry point to Roland's Acoustic Design line: shallow-depth wood shells with double-ply mesh heads on the TD-07 module, with a 12-inch snare on a snare stand, a 10-inch tom, a 12-inch floor tom, an 18-inch kick with air damping, and the VH-10 hi-hat. It weighs 26.4 kg assembled.
A shell kit at the bottom of the range
The VAD103 puts wood shells and acoustic hardware within reach of a first electronic kit. The shells are shallow, the pad count is small — snare, one tom, one floor tom, hi-hat, crash, ride, kick — and every drum mounts on a regular stand rather than on a rack.
For a player whose reason for buying electronic drums is volume rather than sound design, that is the right set of priorities. The kit looks and sets up like the acoustic kit they would rather be playing, and it can live in a room where one would not be welcome.
Quiet on purpose
Two things on this kit are specified for the room rather than the player: double-ply mesh heads and an air-damping system in the kick.
Mesh is already quieter than rubber under the stick, and a second layer damps the acoustic noise the head makes further. The kick is the harder problem — a beater striking a pad is a real impact, transmitted into the floor — and the damping is Roland’s attempt at it. Neither makes an electronic kit silent, and nothing does; what they do is keep the noise the pads themselves make from undermining the reason the kit was bought.
What the toms do and do not do
The PDA100L-BK and PDA120L-BK tom pads trigger from the head; Roland states that rimshot is not supported on either. The snare is the drum with independent head and rim zones.
That is a sensible place to spend the zone count on an entry kit. Rim work on a tom is occasional; rim work on a snare — cross-stick, rimshots — is part of most grooves that get played on one.
The hi-hat is on a stand
The VH-10 mounts on a conventional hi-hat stand and reads pedal position continuously, which is not a given at this end of the market. Half-open playing and foot technique both develop properly, and the motion the foot learns is the motion an acoustic hi-hat asks for.
Above it, the VAD307 adds a second rack tom, a second crash, a larger ride and the TD-17 module. The VAD103 is the same shape of instrument with less on it.
Specifications
| Attribute | Value |
|---|---|
| ekit | |
| Module | TD-071 |
| Pad surface | Double-ply mesh heads on the drum pads1Roland states double-ply mesh heads for the kit's drum pads. It does not publish the surface of the CY cymbal pads. |
| Kit configuration | TD-07 module, PDA120LS-BK snare, PDA100L-BK tom, PDA120L-BK floor tom, VH-10 hi-hat, CY-12C crash, CY-13R ride, KD-180L-BK kick, two DCS-10 combination stands1 |
| Shells | Shallow-depth wood shells — 12 in snare, 10 in tom, 12 in floor tom, 18 in kick1 |
| Snare pad | PDA120LS-BK, 12 in, with independent head and rim zones, mounted on a conventional snare stand1 |
| Kick | KD-180L-BK, 18 in, with an air-damping system to keep the acoustic noise down1 |
| Tom pads | PDA100L-BK and PDA120L-BK; rimshot is not supported on either1 |
| Connectivity | Bluetooth audio for playing along from a phone, tablet or computer1 |
| Footprint | 1,300 mm wide by 1,200 mm deep by 1,200 mm high; 26.4 kg assembled1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec