Drum Atlas
Menu

Sonor · Kompressor

Sonor Kompressor Aluminum

  • Snare drum
  • intermediate
  • current

The Sonor Kompressor Aluminum (KS-140575-SDA) is a 14 × 5.75-inch snare drum on a beaded 2mm aluminium shell — unusually thick for the metal — with 45-degree edges and 2.3mm Power Hoops. It is Sonor's accessible metal snare and the thickest aluminium shell in common production.

Updated 2026-09-11Sources

Two millimetres of aluminium

Aluminium snare shells are usually thin. A Supraphonic is 1.7mm, a Yamaha Recording Custom is 1.2mm, an Acrolite is thinner still. Thin aluminium is light, lively and rings freely.

Sonor went to 2mm, which is heavy for the metal, and the drum that comes out is a different animal. A thicker shell is stiffer, so it vibrates less and imposes less of its own voice on the head. The result is dry and focused with a short decay — crisp rather than ringing, and it cuts without the metallic halo that thinner aluminium drums carry.

If you have ever tuned a Supraphonic and wished the ring would just stop, this is the drum that answers that.

The 5.75-inch depth

Sonor has used unusual depths for decades and this is one of them: a quarter inch deeper than the common 5.5, three quarters shallower than a 6.5.

In practice it behaves like a slightly generous 5.5 — the response and the tuning range of a shallow drum with a little more body underneath. There is no mystery to it, but it does mean aftermarket cases and some stands sized to exact depths need checking.

Double TuneSafe lugs

Sonor’s lug design uses a secondary locking element to resist the tension rod backing off under vibration. Snare drums detune from the top down over a gig more than players notice, and particularly on a drum tuned high.

It is not a glamorous feature. It is the sort of thing that makes the drum you tuned at soundcheck still be in tune at the end of the second set.

Where it fits

This is Sonor’s accessible metal snare — German design and build at a price well below the company’s flagship lines, and well below most of the metal drums it competes with.

The obvious comparison is the Ludwig Acrolite, which is also an inexpensive aluminium snare, and the Kompressor is the drier, more modern, better-appointed drum of the two. The Acrolite has more character and costs less.

Sonor builds the same drum in brass and bronze. The brass is brighter and more projecting; the aluminium is the dry one, and the one to choose if control is what you are after.

Specifications

Specifications
AttributeValue
Shell
Shell materialAluminium1
Shell thickness2 mm2
BeadBeaded shell2
Sibling modelsBrass, 1.2mm black nickel-plated; bronze2
Bearing edge
Bearing edge45°2
Hardware
Lugs10 Double TuneSafe2
Hoops2.3mm Power Hoops2
Throw-offSonor Standard2
Snare side
Snare wires20-strand Sonor Standard2

Hear it

Videos are embedded from YouTube and belong to their creators. Nothing loads until you press play.

Sonor | Kompressor Brass, Aluminum, Steel Snares | Sound Demo

Drums Bonedo · drum enters at 1:52

The 14 × 5.75 trio first; brass, aluminium and steel back to back.

Sonor Kompressor 14″ x 6.5″ Aluminium Snare Drum Demo

Drum Depot

The 14 × 6.5 depth, not the 5.75 listed above.

Where to find it

Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    KS 14×5.75 SDA

    Sonor · accessed 2026-09-11

  2. 2Tier 2 · Higheditorial

    New Sonor Kompressor Snare Drums Review

    Drum Center of New Hampshire · accessed 2026-09-11