Tama · Mastercraft
Tama Bell Brass BB156
The Tama Bell Brass BB156 is a 14 × 6.5-inch snare drum on a 3mm cast bell bronze shell of 355mm diameter, with ten-hole die-cast hoops, the Roller Action strainer, 18-strand carbon steel long wires and the One-Touch Tone Control muffler. It is a 50th-anniversary reissue of Tama's 1980 Mastercraft.
The drum the reissue is of
Tama’s original Bell Brass appeared in 1980 as part of the Mastercraft range, and for forty years it has been among the most sought-after production snare drums ever made. Its reputation rests entirely on the shell: 3mm of cast bell brass, the same high-tin copper alloy cymbals are made from, in a material state that rolling cannot reproduce.
The 2030 reissue is described by Tama as faithfully reproduced to original specifications, down to the snare-side hoop’s enlarged wire window.
Why cast bell brass is different
Casting a 3mm cylinder in a high-tin alloy gives a shell that is both extremely heavy and internally very stiff. It barely moves under a stroke, so the drum is very loud; and because the alloy is the one chosen for cymbals, what ring it does have is complex rather than a single clear tone.
The combination is the source of the Bell Brass’s reputation for cutting through anything.
One-Touch Tone Control
An internal muffler operated from outside the shell, so the damping can be adjusted while playing rather than by reaching over the head. On a drum with this much volume and this much ring, it is less a period detail than a working necessity.
The 18-strand long wires are a lighter set than a modern 20, which keeps the snare response from disappearing under the shell’s output.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Cast bell brass, a copper and tin alloy1 |
| Shell thickness | 3 mm1 |
| Shell diameter | 13.98 in1Tama states 355mm. |
| Hardware | |
| Hoops | 10-hole die-cast, with a reproduction snare-side hoop carrying a larger wire window1 |
| Throw-off | Roller Action strainer, single on/off lever with dual guide rollers1 |
| Muffler | One-Touch Tone Control1 |
| Snare side | |
| Snare wires | 18-strand carbon steel long wires (6035N)1 |
| Origin | |
| Made in | Japan1 |
| model | |
| Model | BB-1561 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec