Drum Atlas
Menu

DW · Collector's Series

DW Collector's Series Brushed Bell Bronze

  • Snare drum
  • flagship
  • current

The DW Collector's Series Brushed Bell Bronze is a 6.5 × 14-inch snare drum on a 3mm rolled bronze shell with a brushed finish, 3mm steel True-Hoops, turret lugs and the MAG throw-off with a five-position butt plate. DW describes the shell as dark with plenty of volume and projection.

Updated 2026-09-24Sources

Three millimetres of bronze

Bronze is heavier than brass and much heavier than aluminium, and 3mm is about as thick as a rolled shell gets before the drum becomes unreasonable to carry. The mass is the point: almost none of the stroke is absorbed by the cylinder, so it comes back as volume.

Bronze’s own voicing is darker than brass at the same thickness, with the upper partials falling away faster. The combination — loud, dark, and slow to decay at the bottom — is why bell bronze turns up on drums meant to be heard over a large ensemble.

Rolled, not cast

Cast bell bronze is the material of orchestral cymbals and of a handful of very expensive snares. Rolling it instead of casting it gives a more uniform wall and a slightly less complex sound, and it is what makes a 3mm bronze drum buildable in a production series at all.

Sizes and finish

DW builds the drum in 5.5 and 6.5-inch depths. The brushed finish is the standard treatment here rather than a polish — bronze takes a brushed surface well and shows fingerprints far less than polished brass does.

Specifications

Specifications
AttributeValue
Shell
Shell materialRolled bronze1
Shell thickness3 mm1
Hardware
LugsCollector's Series turret lugs1
Hoops3mm steel True-Hoops1
Throw-offMAG throw-off with five-position butt plate1
Tension rodsTrue-Pitch 501
model
Part numberDCMZ36514SCX7211
drum
CharacterDark, with volume and projection1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Collector's Brushed Bell Bronze Snare Drum 6.5x14

    Drum Workshop · accessed 2026-09-24