Drum Atlas
Menu

PDP · Concept

PDP Concept Brushed Brass

  • Snare drum
  • intermediate
  • current

The PDP Concept Brushed Brass is a 1.2mm rolled and double-beaded brass snare drum with a brushed satin exterior, built at 14 inches in 5, 6.5 and 8-inch depths. It carries dual-turret lugs, True Pitch tension rods and the DW MAG throw-off, and PDP describes a heavy attack with a wide tuning range.

Updated 2026-09-24Sources

Thin brass is a deliberate choice

PDP’s own wording is worth quoting back: a lower tone from a thinner shell. That is the correct mechanism and the opposite of the intuition most players start with.

A thick shell reflects the head’s energy back quickly and raises the pitch; a thin one flexes, takes longer to return the energy, and lets the drum sit lower. At 1.2mm this brass shell moves, and the fundamental drops accordingly.

The wide tuning range

Two beads on a thin shell is what makes the range possible. A plain 1.2mm cylinder tuned high starts to go out of round; the beads hold it and let the drum climb without losing its centre.

Downwards it stays warm rather than turning to a flap, which is where thin brass has the advantage over thin steel.

The brushed surface

Brushed rather than polished brass is a practical finish as well as a look: it hides handling marks and it does not need the lacquer that a mirror polish requires. It will still darken over the years where hands touch it.

Specifications

Specifications
AttributeValue
Shell
Shell materialRolled brass1
Shell thickness1.2 mm1
BeadDouble-beaded1
Hardware
LugsDual-turret1
Throw-offDW MAG throw-off1
Tension rodsTrue Pitch1
model
Part numbersPDSN0514NBBC, PDSN6514NBBC, PDSN0814NBBC1
drum
CharacterLower tone from a thinner shell, heavy attack, wide tuning range1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    PDP Concept Brushed Brass Snare, 6.5x14

    Pacific Drums and Percussion · accessed 2026-09-24