Drum Atlas
Menu

PDP · Concept

PDP Black Nickel Over Steel

  • Snare drum
  • intermediate
  • current

The PDP Black Nickel Over Steel is a 1mm dual-beaded rolled steel snare drum plated in black nickel, built in five sizes from 6 × 10 to 6.5 × 14. It carries dual-turret lugs, the DW MAG throw-off and fully chromed wires with carbon steel coils and brass end plates.

Updated 2026-09-24Sources

Two beads, not one

Most rolled metal snare shells carry a single bead around the middle. The bead stiffens the cylinder and raises its pitch, and where it sits determines how the shell’s modes fall.

The PDP shell has two. Rolling a second bead divides the cylinder into three bands rather than two, which stiffens it further and spreads the shell’s resonances out instead of concentrating them in one clear ring.

The audible effect on a 1mm steel drum is useful: the brightness stays, the single long tone of a plain steel shell does not.

Black nickel on steel

Black nickel is usually seen over brass, where it is part of a century-old recipe. Over steel it is mainly cosmetic — the plating is too thin to change the acoustics of a shell this stiff — but it does give the drum a harder-wearing surface than chrome and a matt, dark look.

Five sizes

The 5.5 and 6.5 × 14 are the working drums. The 13 × 6.5 is deep for its diameter and lands high with real body. The 12 × 6 and 10 × 6 are side snares, and on steel at this thickness they are very bright indeed.

Specifications

Specifications
AttributeValue
Shell
Shell materialRolled steel, black nickel plated1
Shell thickness1 mm1
BeadDual-beaded1
Hardware
LugsDual-turret1
Throw-offDW MAG throw-off1
Snare side
Snare wiresFully chromed, carbon steel coils with brass end plates1
model
Part numberPDSN6514BNCR1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    PDP Blk Nickel Over Steel Snare, 6.5x14

    Pacific Drums and Percussion · accessed 2026-09-24