Drum Atlas
Menu

PDP · Concept

PDP Concept Brushed Copper

  • Snare drum
  • intermediate
  • current

The PDP Concept Brushed Copper is a 1.2mm rolled and double-beaded copper snare drum with a brushed exterior, built at 14 inches in 5, 6.5 and 8-inch depths. It carries dual-turret lugs, True Pitch tension rods and the DW MAG throw-off, and PDP characterises it as warmer and darker than its brass sibling.

Updated 2026-09-24Sources

The same shell in a different metal

The Brushed Brass and the Brushed Copper are built identically: 1.2mm, rolled, double-beaded, same hoops, same lugs, same throw-off, same three depths. The only variable is the metal, which makes the pair an unusually clean comparison.

Copper is softer than brass and loses its upper partials faster, so the same shell in copper lands darker and rounder with a shorter tail. Brass keeps more of the bright ring and cuts harder.

Which to take

If the drum has to be heard over guitars, the brass is the safer answer. If it is going in front of a microphone, or into a band where the snare should sit in the track rather than on top of it, the copper needs less work afterwards.

At 8 × 14 the copper is the more interesting of the two — depth exaggerates the low end, and copper handles that better than brass does.

Surface

Brushed copper will patinate. Left alone it darkens to a deep brown over a few years, which many owners prefer; kept polished it stays pink. Neither changes the sound.

Specifications

Specifications
AttributeValue
Shell
Shell materialRolled copper1
Shell thickness1.2 mm1
BeadDouble-beaded1
Hardware
LugsDual-turret1
Throw-offDW MAG throw-off1
Tension rodsTrue Pitch1
model
Part numbersPDSN0514NBCC, PDSN6514NBCC, PDSN0814NBCC1
drum
CharacterWarmer and darker than brass1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    PDP Concept Brushed Copper Snare, 6.5x14

    Pacific Drums and Percussion · accessed 2026-09-24