
DW · Collector's Series
DW Collector's Series Polished Bell Brass
The DW Collector's Series Polished Bell Brass is a rolled and polished heavy-gauge brass snare drum offered at 14 inches in 4, 5.5 and 6.5-inch depths. It carries True-Hoops, Collector's Series turret lugs, True-Pitch tension rods and the MAG throw-off with a five-position butt plate.
Heavy-gauge brass
DW’s description of this drum leans on the words “rolled, polished and heavy-duty”, and the weight is what separates it from the company’s other brass snare. The Black Nickel over Brass is built on a 1mm shell; this one is substantially thicker, and the difference shows up as mids and low-end attack rather than as ring.
Brass at that mass does not so much sing as thump. The fundamental is low for a metal drum, and the note has a body underneath it that thin brass shells do not produce.
Four inches is the interesting size
The 4 × 14 is the one to note. A shallow drum on a thick, heavy shell is a rare pairing — shallow usually means thin and high — and what comes out is a piccolo pitch with an unexpectedly solid bottom to it.
The 5.5 and 6.5 behave more conventionally, with the 6.5 the loudest drum of the three by a clear margin.
Finish
Polished brass is a maintenance finish: it is lacquered at the factory, and once that lacquer wears the shell will patinate where hands and sticks touch it. Some players lacquer it again; others let it go, which is a matter of taste rather than of sound.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Rolled and polished brass, heavy gauge1 |
| Hardware | |
| Lugs | Collector's Series turret lugs1 |
| Hoops | True-Hoops1 |
| Throw-off | MAG throw-off with five-position butt plate1 |
| Tension rods | True-Pitch1 |
| model | |
| Part numbers | DCMR30414SCX713, DCMR35514SCX713, DCMR36514SCX7131 |
| drum | |
| Character | Fat mids and low-end attack1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec