
DW · Collector's Series
DW Collector's Series Black Nickel Over Brass
The DW Collector's Series Black Nickel Over Brass is a 1mm rolled brass snare drum plated in black nickel, built in 5.5 × 14, 6.5 × 14, 8 × 14 and 7 × 13. It carries 3mm True-Hoops, Collector's turret lugs, True-Pitch 50 tuning rods and the MAG throw-off with a five-position butt plate.
Thin brass, in the classic idiom
A millimetre of rolled brass under black nickel is the specification of the most recorded metal snare family there is. DW’s version keeps the recipe and changes the hardware: turret lugs rather than imperial or tube lugs, 3mm True-Hoops rather than 2.3mm triple-flanged rims, and the MAG throw-off.
The thin shell is what makes it a thin-brass drum rather than a heavy one — bright, singing, with a long tail and a rimshot that carries.
What the heavier hoops change
3mm True-Hoops are noticeably stiffer than the 2.3mm hoops usually fitted to a 1mm brass shell. They clamp the head edge harder, which shortens the decay at the very top of the drum’s range and makes the rimshot more immediate.
Against a more traditionally hooped thin-brass snare, expect a slightly tighter, more controlled version of the same sound.
Four sizes
5.5 and 6.5 are the everyday depths. The 8 × 14 is a deliberately large drum with a long, low note — brass at that depth stays articulate where wood would start to spread. The 7 × 13 is the sleeper: narrower and deep, it lands high and fat at once.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Rolled brass, black nickel plated1 |
| Shell thickness | 1 mm1 |
| Hardware | |
| Lugs | Collector's Series turret lugs1 |
| Hoops | 3mm True-Hoops1 |
| Throw-off | MAG throw-off with five-position butt plate1 |
| Tension rods | True-Pitch 501 |
| model | |
| Part numbers | DCMR15514SCX709, DCMR16514SCX709, DCMR10814SCX709, DCMR10713SCX7091 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec