
DW · Collector's Series
DW Collector's Series Carbon Fiber
The DW Collector's Series Carbon Fiber is a 6.5 × 14-inch snare drum on a 3mm braided carbon fibre shell, fitted with 3mm True-Hoops, Collector's Series turret lugs and the MAG throw-off. Carbon fibre is stiffer than any metal shell of the same weight, which gives a very fast, high-pitched response.
Stiffness without mass
Carbon fibre’s defining property is a very high stiffness-to-weight ratio. A 3mm carbon shell weighs much less than 3mm of brass but resists deformation more, which is an unusual combination in a drum shell and produces an unusual sound.
Energy returns to the head almost immediately rather than being stored in the cylinder, so the attack is exceptionally fast and the pitch sits high. There is very little of the low-frequency shell movement that gives a wood or thin metal drum its body.
Reading the braid
The braided aesthetic is not only cosmetic. Braided rather than unidirectional layup means the fibres run at angles to each other, so the shell is stiff in every direction instead of just around the circumference — which matters when ten tension rods are pulling on it in a ring.
Against the other exotic shells
Set beside the Concrete, the two drums fail in opposite directions. Concrete kills sustain through internal damping and lands dark and heavy; carbon fibre kills it through sheer stiffness and lands bright and light. Neither is a substitute for the other.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec