
DW · Collector's Series
DW Collector's Series Stainless Steel
The DW Collector's Series Stainless Steel is a rolled stainless steel snare drum built in 4.5, 5.5 and 6.5-inch depths at 14 inches, with chrome-plated triple-flanged True-Hoops, Collector's Series turret lugs, True-Pitch tension rods and the MAG throw-off with a five-position butt plate.
The lighter metal drum
DW’s own framing of this shell is that it is light — a rolled stainless cylinder rather than a thick cast or heavy-gauge one. That matters because stainless is already a hard, bright metal, and adding mass to it produces a drum that is loud in a way most rooms cannot use.
Kept thin, it stays fast and articulate, with a clean high end and a rimshot that cuts without becoming a crash.
No plating to fail
Stainless needs no chrome over it, so the shell has one fewer layer than a plated steel drum. That is a durability argument rather than an acoustic one — plating on a snare shell eventually chips at the edges and around the lug holes — but it is a real one on a drum meant to last decades.
Three depths
4.5 inches is unusually shallow for a Collector’s metal drum and reads almost as a piccolo: very high, very quick. 5.5 is the standard all-rounder. 6.5 adds the low end that stainless otherwise lacks and is the one most likely to work as a single main snare.
Triple-flanged hoops rather than cast ones keep the drum open, which on this material is a sensible pairing.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Rolled stainless steel1 |
| Hardware | |
| Lugs | Collector's Series turret lugs1 |
| Hoops | Chrome-plated triple-flanged True-Hoops1 |
| Throw-off | MAG throw-off with five-position butt plate1 |
| Tension rods | True-Pitch1 |
| Origin | |
| Made in | United States1 |
| model | |
| Part numbers | DCMS14514SCX717, DCMS15514SCX717, DCMS16514SCX7171 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec