
DW · Collector's Series
DW Collector's Series Concrete
The DW Collector's Series Concrete is a 6.5 × 14-inch snare drum with a 5.5mm cast concrete shell, cut with 45-degree bearing edges and snare beds and fitted with 3mm True-Hoops and the MAG throw-off. DW describes it as a first of its kind; it is assembled at the California custom shop.
A shell material with no ring
Every shell material in common use — wood, brass, aluminium, steel, acrylic — is elastic enough to store and return energy, which is what produces a drum’s sustain. Concrete is not. It is stiff and internally lossy, so energy put into the shell mostly stays there as heat.
The consequence is a drum whose note is almost entirely head and wires, with very little shell colour behind it. DW’s own description reaches for “punch, warmth and tonality”; the character players tend to notice first is how quickly the drum stops.
Casting rather than forming
A 5.5mm cast shell has to carry the load of ten tension rods without cracking, which is a real engineering problem for a brittle material. Cutting 45-degree bearing edges and snare beds into cast concrete is the other hard part, and it is why the drum exists as a custom shop item rather than a production one.
Who it is for
Anyone whose problem is a room that will not stop ringing. It is a specialist drum — loud, dry, short, heavy to carry — and a genuinely different instrument rather than a variation on one.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Cast concrete1 |
| Shell thickness | 5.5 mm1 |
| Bearing edge | |
| Bearing edge | 45°, cut with the snare beds1 |
| Hardware | |
| Lugs | Collector's Series turret lugs1 |
| Hoops | 3mm True-Hoops1 |
| Throw-off | MAG throw-off with three-position butt plate1 |
| Snare side | |
| Snare wires | True-Tone1 |
| Origin | |
| Made in | United States1 |
| model | |
| Part number | DCMC56514SCX7201 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec