
DW · Collector's Series
DW Collector's Series Polished Copper
The DW Collector's Series Polished Copper is a 3mm polished copper snare drum built at 14 inches in 4, 5.5 and 6.5-inch depths, with True-Hoops, Collector's Series turret lugs, True-Tone snare wires and the MAG throw-off over a five-position butt plate. It is handcrafted in Oxnard, California.
Three millimetres is a lot of copper
Copper is soft. Most copper snares are built around a millimetre or a little more, because that is where the metal is workable and the drum stays lively. At 3mm the shell is thick enough that it barely moves, and the character shifts markedly.
What you get is copper’s dark voicing with a metal drum’s volume behind it: a low fundamental, very little ring, and an attack with weight rather than edge.
Against the Ludwig Copperphonic
The comparison most players will want. The Copperphonic uses a thinner shell and reads brighter and more open, with more of the metallic sustain that makes a Supraphonic recognisable. The DW at 3mm is darker, shorter and louder, and gives up most of that sustain to get there.
Neither is more correct. They are different answers to the same material.
Living with a polished copper shell
Bare copper oxidises quickly. Factory lacquer holds it off for a while; after that the shell will darken unevenly wherever it is handled. Many owners prefer that, but it is worth knowing that a polished copper drum does not stay polished without work.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Polished copper1 |
| Shell thickness | 3 mm1 |
| Hardware | |
| Lugs | Collector's Series turret lugs1 |
| Hoops | True-Hoops1 |
| Throw-off | MAG throw-off with five-position butt plate1 |
| Snare side | |
| Snare wires | True-Tone1 |
| Origin | |
| Made in | United States1 |
| model | |
| Part numbers | DCMC30414SCX714, DCMC35514SCX714, DCMC36514SCX7141 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec