The British Drum Co. Super 7 is a 13 × 7-inch snare drum on a 10-ply shell with a purpleheart inner veneer and a high-gloss fiddleback sycamore exterior, cut with a 45-degree bearing edge and fitted with Palladium lugs and strainer. Four vents are cut into the shell.
Thirteen by seven
The name is the size. Seven inches of depth on a 13-inch head is the extreme end of the narrow-and-deep format, and British Drum Co.’s own framing of the trade-off is precise: a higher pitch without sacrificing the body of the drum’s tone.
That is exactly what the geometry does. The smaller head raises the pitch; the depth restores the air volume a 13-inch drum would otherwise lack.
Four vents
Most snares have one vent hole. A deep drum on a small diameter has a lot of air to move and only a small head area to move it through, and one vent can leave the drum feeling slow to recover between strokes.
Four vents is the company’s answer, and it is stated as a sensitivity and volume measure rather than a cosmetic one.
Purpleheart inside, sycamore outside
Purpleheart is among the hardest woods used in drum building; fiddleback sycamore is a figured, comparatively soft European timber. Putting the hard wood on the inner surface — where the head’s energy arrives first — and the figured wood outside is a sensible division of labour between sound and appearance.
The purpleheart also reappears as a veneer on the name badge and the B badge, which ties the drum’s two woods together visually.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | 10-ply with purpleheart inner veneer and fiddleback sycamore outer1 |
| Plies | 101 |
| Construction | Cold-press moulded1 |
| Venting | Four vents1 |
| Bearing edge | |
| Bearing edge | 45°1 |
| Hardware | |
| Lugs | Palladium, with ThreadGrip1 |
| Throw-off | Palladium snare strainer1 |
| Origin | |
| Made in | United Kingdom1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
