The British Drum Co. Raven is a 14 × 6-inch snare drum on a 10-ply, 6mm Scandinavian birch shell with a black ash outer veneer, cut with a 45-degree bearing edge and fitted with the company's Palladium hardware. It is hand-made in Britain.
Ten plies at six millimetres
The arithmetic is worth pausing on: ten plies in a 6mm wall means each ply is around six-tenths of a millimetre. That is very thin veneer, and building a stable shell from it requires the cold-press moulding process British Drum Co. uses across its range.
A shell made this way is stiffer than its thickness suggests, because the glue lines between many thin plies add rigidity. The drum lands bright and focused without the deadness a genuinely thick shell would bring.
Birch with an ash face
Scandinavian birch is the structural wood; black ash is the outer veneer and the finish. Birch’s lift at the top and quick decay are what the company’s own description — cutting high frequencies, balanced lows and mids — is pointing at.
Six inches of depth is the balancing factor. It gives the drum enough body that the birch’s brightness reads as clarity rather than as thinness.
Positioned as the value drum
British Drum Co. describes the Raven as its best-value snare, and the specification bears that out rather than contradicting it: the same Palladium hardware and the same cold-press shell process as the more expensive models, with a plainer veneer and no signature associations.
The vent badge is modelled on the walls of the Tower of London, which is the kind of detail the company puts on every drum it makes.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Scandinavian birch, with a black ash outer veneer1 |
| Plies | 101 |
| Shell thickness | 6 mm1 |
| Bearing edge | |
| Bearing edge | 45°1 |
| Hardware | |
| Hardware | Palladium, made in-house1 |
| Throw-off | Palladium snare strainer1 |
| Origin | |
| Made in | United Kingdom1 |
| drum | |
| Character | Cutting high frequencies with balanced low and mid tones1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
