Drum Atlas
Menu

Tama · S.L.P.

Tama S.L.P. Mod Bubinga

  • Snare drum
  • pro
  • current

The Tama S.L.P. Mod Bubinga is a 12 × 7-inch snare drum on a 9-ply, 6mm bubinga shell with a six-hole Sound Arc hoop and 20-strand carbon steel wires, in a satin bubinga lacquer. The narrow, deep format puts the pitch well above a 14-inch drum while keeping real body.

Updated 2026-09-24Sources

Twelve by seven

Seven inches of depth on a 12-inch head is an extreme ratio and a deliberate one. The small head raises the pitch sharply; the depth puts far more air behind it than a 12-inch drum normally has.

The result speaks high and fast but with a fundamental underneath it, which is what separates this from the shallow 12-inch effect snares it superficially resembles.

Six lugs

Only six tension points around the head, where a 14-inch drum would carry eight or ten. On a small diameter that is enough — the unsupported arc between lugs stays short — and fewer lugs means less hardware mass clamped to a shell that is only 6mm thick.

The Sound Arc hoop is Tama’s pressed rim with an inward-curving profile that contacts the head over a narrow line, which suits a drum tuned high.

Bubinga at nine plies

Bubinga is a dense African hardwood, considerably heavier than maple. Nine plies of it at 6mm is a firm shell that returns energy quickly, and the species’ own voicing adds low-mid weight that a 12-inch drum would otherwise lack entirely.

Against Tama’s G-Bubinga, which is twelve plies at 10mm on a 14-inch shell, this is the smaller and quicker reading of the same wood.

Specifications

Specifications
AttributeValue
Shell
Shell materialBubinga1
Plies91
Shell thickness6.0 mm1
Hardware
HoopsSound Arc hoop, 6 hole1
Snare side
Snare wires20-strand carbon steel1
model
ModelLBU1271

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    S.L.P. Mod Bubinga LBU127

    Tama · accessed 2026-09-24