Sonor · 4000
Sonor 4000 Hardware Series
The Sonor 4000 is the company's road-ready professional hardware line, assembled from a large range of individual components rather than sold only as packs. Its cymbal boom arm retracts completely into the stand, converting a mini boom into a straight cymbal stand without removing anything.
The retracting boom
A boom arm is a cantilever that puts a cymbal somewhere a straight stand cannot reach — over a tom, in front of a hi-hat, angled down toward the player.
It is also the thing that will not fit on a small stage, and the thing your guitarist walks into.
A retractable boom slides fully back inside the upper tube, so the stand becomes a straight one in a few seconds and becomes a boom again just as quickly. Nothing comes off, so nothing is left behind — which is the failure mode of the detachable kind.
Tama does the same on the Roadpro and DW on the 9700. That three of the major makers arrived at the same answer says something: a boom you have to remove is a boom you eventually lose.
Components, not packs
Most hardware is sold as a pack: a snare stand, a hi-hat, two cymbal stands and a pedal, priced together.
Packs are good value and they assume your kit is standard. Sonor’s framing of the 4000 is that it is “equipped with lots of individual components” — the range is deep enough to build an unusual setup from parts rather than buy a pack and then buy the odd pieces separately.
For a player with three floor toms, or a left-side ride, or a percussion table, that distinction is most of the decision.
Road-ready, and what Sonor means by the tiers
The company’s hardware ladder runs 1000, 2000, 4000, then 600 / 6000 at the top. The 4000 is the first tier described as professional and road-ready, which places it where most working drummers actually buy.
What separates it from the 600 above is the clamp engineering and the independently adjustable legs; what separates it from the 2000 below is that the 2000 is a sturdier version of a basic stand rather than a system with a component catalogue behind it.
Ease of teardown
Sonor names setting up, adjusting and tearing down as the 4000’s design brief, which is a different emphasis from stiffness or mass.
It is the right one for a line at this level. A working drummer sets a kit up and takes it down several hundred times a year and plays it a few hundred hours. Hardware that comes apart quickly and goes back to the same place is worth more of those hours than hardware that is marginally more rigid.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec