Drum Atlas
Menu

DW · 6000 Series

DW 6500 Flush Base Hi-Hat Stand

  • Hardware
  • pro
  • current

The DW 6500 is a flush-base hi-hat stand weighing 6.7 pounds, using an offset direct-pull linkage with a spring tension adjuster and DW's Delta ball-bearing hinge. It ships with 21-inch and 15-inch pull rods, hinged memory locks and a locking clutch.

Updated 2026-09-24Sources

Flush base versus tripod

A tripod hi-hat stand has three legs that splay out and sit under the cymbals. A flush base has three flat legs that lie along the floor, close to it, in the same plane as the stand’s foot.

What that buys is room. The legs of a tripod hat are exactly where a double pedal’s slave wants to be, and exactly where the snare stand’s front leg wants to be. A flush base lets all three occupy the same square foot of stage, which is why the design has followed bop kits and tight setups since the 1930s and keeps coming back.

What it gives up is the vertical stiffness of a splayed tripod. A flush base resists being pushed over less well, and it is the reason this style tends to be paired with lighter cymbals and a seated player who is not stamping.

Offset direct pull

Three ways to connect a footboard to a pull rod: a chain, a strap, or a solid link.

Direct pull is the solid link — no chain to stretch, no strap to age, no slack anywhere in the system. The pedal moves the rod instantly, which is what makes the action feel immediate under the foot rather than slightly cushioned.

Offsetting it moves the linkage out of the centre line. The practical result is that the pull rod runs clear of the footboard’s travel, which is what allows the legs to lie flat and still leave the mechanism room to work.

Six and a bit pounds

The weight is the headline, and it is unusually low for a hi-hat stand with a bearing hinge and a tension adjuster in it.

A lightweight stand trades some of its resistance to being shoved. What it gains is a hardware bag you can carry in one trip — a five-piece kit’s hardware assembled from the 6000 Series is a different object to lift than the same kit on 9000, and for a drummer who loads their own car that is a real part of the instrument.

Specifications

Specifications
AttributeValue
Hardware
TypeHi-hat stand1
BaseFlush base1
Weight6.7 lb1
LinkageOffset direct pull with spring tension adjuster1
HingeDelta ball-bearing, US Patent 54310811
Pull rods21 in and 15 in, both supplied1
ClutchLocking1
Memory locksHinged1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    DW 6000 Series Flush Base Hi-Hat Stand — DWCP6500

    Drum Workshop · accessed 2026-09-24