Drum Atlas
Menu

Canopus · Light Weight

Canopus CHS-1 Light Weight Hi-Hat Stand

  • Hardware
  • pro
  • current

The Canopus CHS-1 is a hi-hat stand weighing 2.8 kg, built on 19 mm and 16 mm tube. Its legs rotate to clear a double pedal, the spring tension adjusts, and a bearing is used in the action. Height runs from about 740 to 870 mm.

Updated 2026-09-24Sources

Six pounds

A hi-hat stand is normally the second-heaviest thing in a hardware bag after the throne, and 2.8 kg is roughly half what a heavy-duty one weighs — DW’s flush-base 6500, itself the light option in that range, is 6.7 lb where this is 6.17.

Canopus is direct about the prejudice it is working against: lightweight hardware reads as cheap, flimsy or fragile, and the company’s stated aim was function and durability for professional use at minimal weight.

The route there is tube diameter and leg width, both kept to the minimum the loads allow. Nothing exotic — just a refusal to add metal that is not doing anything.

The rotating legs

The most specific feature here, and it addresses the single most common setup conflict on a drum kit.

A hi-hat stand’s three legs occupy the same floor as the double pedal’s slave, the snare stand’s front leg and the player’s own left foot. On most stands the legs are fixed in their splay, so solving that conflict means moving the whole stand — which moves the cymbals.

Legs that rotate around the column let you turn the obstruction out of the way while the stand stays where the hi-hat needs to be. It is the same problem Sonor answers with independently adjustable base legs and DW with a two-leg hi-hat, solved a third way.

A bearing, in a light stand

Bearings add cost and a little weight, and they are the first thing omitted from a stand built down to a price.

Their presence here is the evidence for Canopus’s claim that this is a light stand rather than a cheap one. The hi-hat’s action is the part a drummer feels most directly — a rod running in a plain bush is stiff, then loose, then notchy — and a bearing is what keeps a light stand from feeling like a compromise.

Where 740 mm puts the cymbals

About 29 inches at the bottom and 34 at the top. That is a normal working range rather than a wide one, and it reflects the design: a stand that does not extend to towering heights does not need the tube diameter that would support them.

For a player sitting at a conventional height with the hats in a conventional place, it is the range that gets used. For a very tall player or someone who plays the hats high and open, the heavier stands have the reach.

Specifications

Specifications
AttributeValue
Hardware
TypeHi-hat stand1
Weight2.8 kg1
Height range740–870 mm1
Tube diameters19 mm and 16 mm1
LegsRotating, to leave room for a double pedal1
TensionSpring adjustment fitted1
BearingsFitted1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Light Weight Hi-Hat Stand CHS-1

    Canopus · accessed 2026-09-24