Drum Atlas
Menu

Canopus · Hybrid

Canopus CDT2-1HY Hybrid Drum Throne II

  • Hardware
  • pro
  • current

The Canopus Hybrid Drum Throne II has a seat top woven from sisal hemp and rayon over firm urethane, on an iron-plate joint and a base of aluminium legs with steel rods. It weighs 6.1 kg in total — 2.8 for the seat, 3.3 for the legs — and adjusts between 520 and 720 mm.

Updated 2026-09-24Sources

Sisal hemp on a drum throne

An unusual material choice, and it is doing one job: airflow.

Sisal is a coarse plant fibre with a loose, open weave — the material of rope and of natural-fibre matting. Woven into a seat top it leaves large gaps between fibres, so air moves through the surface rather than being trapped against it.

Vinyl does the opposite: it is a sealed membrane, and everything the player produces over three hours stays between them and the seat.

The trade-off with a coarse fibre is comfort against bare skin, which is why Canopus blends it with rayon. Rayon is smooth and soft where sisal is not, so the surface you sit on has the hemp’s structure and the rayon’s feel.

Firm urethane, deliberately

Underneath is urethane foam, and Canopus specifies it as reasonably firm rather than soft.

That reflects the same finding Tama reached with the Glide Rider: the seat that feels best for five seconds in a shop is too soft to play on. A soft cushion lets the pelvis sink and roll backward, which rounds the spine and takes away the stable platform the legs need to work two pedals from.

Firm foam keeps the sit bones supported and the pelvis upright. It feels less generous and it plays better.

Where the metals go

The throne’s construction is a study in putting each material where it earns its keep.

Iron plate at the joint between seat and post — the part carrying a cantilevered load and the part most likely to loosen. Steel is stiff and cheap to make stiff, and the weight is at the centre where it does not have to be carried far.

Aluminium in the long legs, where length multiplies any weight saved and where a large tube section regains the stiffness the material gives up.

Steel rods in the bracing, where the load is tension and compression along a line rather than bending, and steel’s stiffness per unit cost is at its best.

That is what “hybrid” refers to here — not a hybrid of styles, but of materials chosen part by part.

Six kilos, in two pieces

The total is 6.1 kg, and Canopus lists the seat and the leg part separately because they come apart: 2.8 and 3.3.

A throne that separates is a throne that packs. Assembled it is the worst shape in a hardware load; split into a disc and a folded tripod it is two flat objects, and each half is light enough to carry alongside something else.

Specifications

Specifications
AttributeValue
Hardware
TypeDrum throne1
Seat topSisal hemp and rayon over firm urethane1
Height range520–720 mm1
Weight6.1 kg1
Weight, seat2.8 kg1
Weight, leg part3.3 kg1
JointIron plate1
LegsAluminium long legs with steel rods1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Hybrid Drum Throne II CDT2-1HY

    Canopus · accessed 2026-09-24