Drum Atlas
Menu

Roland · V-Drums Acoustic Design

Roland VAD716

  • Electronic kit
  • flagship
  • current

The VAD716 is the acoustic-shell version of the TD716: the same V71 module and the same three digital pads, but mounted in full-depth wood shells — 10 and 12 inch rack toms, two 14-inch floor toms and a 22-inch kick — set up on conventional hardware rather than a rack.

Updated 2026-09-24Sources

What Acoustic Design actually changes

The VAD line answers a question that has nothing to do with sound: what the kit looks like and how it occupies a room. The electronics are the TD716’s — same V71, same PD-14DSX digital snare, same VH-14D hi-hat and CY-18DR ride. What differs is the furniture.

Full-depth wood shells replace the shallow pads. A 22-inch kick stands on spurs rather than bolting to a rack. The toms mount on conventional hardware, and there are two 14-inch floor toms standing on legs. The kit sets up the way an acoustic kit sets up, and is played from the same distances.

For a drummer who has spent twenty years learning where a floor tom sits relative to a hi-hat, that is not cosmetic. Reach and angle are technique.

The cost of the shells

Thirteen kilos and thirty centimetres of width, against the TD716. At 69.4 kg and 1,950 mm across, the VAD716 loads into a van like a drum kit, because it is the size of one.

It is also the reason the line exists on stages: a rack kit reads as equipment from the back of a room, and a shell kit reads as drums. Bands with a visual identity have cared about that since the VAD range started.

The same three digital pads

Snare, hi-hat and ride sense digitally and connect over the V71’s USB-A digital ports. Head position on the snare, continuous hi-hat travel, and bow/edge/bell separation on an 18-inch ride all come back with far more resolution than a piezo can supply.

Everything else is on the V71’s fourteen analogue trigger inputs, with four AUX jacks spare — room for an extra tom, a cowbell pad or a set of acoustic drum triggers without touching the kit as sold.

Where it fits

Against the VAD516 it is the larger and deeper instrument: a V71 rather than a V51, an extra floor tom, and a full 22-inch kick. Against the TD716 it is the same kit in different clothes, and the choice between them is about the room, the transport and the look rather than about the sound.

Specifications

Specifications
AttributeValue
ekit
ModuleV711
Pad surfaceThree-ply mesh on the PD-14DSX snare2Roland states the three-ply mesh head on the PD-14DSX product page. It does not publish a head material for the PDA-series shell toms or the CY cymbal pads on the VAD716 page, so those are left unstated rather than read off a photograph.
Kit configurationV71 module, PD-14DSX snare, PDA100 and PDA120 rack toms, two PDA140F floor toms, VH-14D hi-hat, two CY-16R-T crashes, CY-18DR ride, KD-22 kick, DTS-30S stand set1
ShellsFull-depth wood shells — 10 in and 12 in rack toms, two 14 in floor toms, 22 in kick1
KickKD-22, 22 in acoustic wood shell with a drumhead-mounted sensor1
Trigger inputsThree digital and fourteen analogue on the V71, with four spare AUX jacks on this configuration1
Footprint1,950 mm wide by 1,500 mm deep by 1,250 mm high; 69.4 kg assembled1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Roland VAD716

    Roland · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    Roland PD-14DSX Digital Snare Pad

    Roland · accessed 2026-09-24